Henriette Fireplace February 10th, 2018 - 12:53:24
Prefabricated Fireplaces Prefabricated fireplaces, also known as zero-clearance fireplaces, are highly insulated, so they can be installed within an inch of combustible materials, such as wall framing. They are preferred in new construction because theyre much lighter in weight, are faster and easier to install than standard masonry units, and are energy-efficient. Many newer prefabricated fireplaces are prefabricated from metal and installed in wood-frame walls. They generally have a metal shell and a realistic brick-lined firebox. Wood Stoves A wood stove is essentially a metal container for a fire. Made from cast iron or brick-lined, welded plate steel, a wood stove has an inlet for combustion air and an outlet for combustion gases, or smoke. Most modern wood stoves are airtight and allow the amount of combustion air that feeds the flame to be controlled. This control allows a wood stove to burn far more efficiently than a traditional open fireplace.
An alternative to using a fireplace brush to get the rest of the ash out would be to use a vacuum. Make sure you use a vacuum that has a good filter on it, as ash has very tiny particles. Ash vacuums are specially designed with extra fine filters, so this would be a great option. It is not as messy as sweeping up all that ash, either! Another advantage to using ash vacuums is that you do not have to wait until your ashes and embers are completely cooled before vacuuming them up. Make sure you carefully read all labels and instructions on your specific ash vacuum. If you really want to do a deep cleaning, you can use a damp rag and wipe down the walls and floor of your firebox. This is completely optional and only for those who like that "white glove" test.
While these screens will not stop a rolling log they will protect areas outside the hearth from flying sparks from popping wood sap. One of the greatest advantages to mesh screens is that they require no extra space or braces and do not extend past the flush face of the fireplace. Another very common type of fireplace screen is made of iron, brass or steel and mounts in front of or on the hearth free-standing in front of the firebox. These fireplace screens can be a simple flat screen, might be free standing on leg-brackets and could be the more common three-sided screen. Three-sided screens have a center section that spans the width of the fireplace. The two sides are hinged to turn at a thirty to forty-five degree angle thus holding the screen plum straight up. The fireplace screen can have fireplace tools, candles and all manner of artistic décor built into the design.
Fireplace screens can serve as spark arrestors for the wood burning fireplace and as decorative items or they can help protect a hearth floor area from rolling logs moving around as flames burn off a wood stack in the case of sturdier types of screens. Most screens are made of metal such as brass or more commonly wrought iron or steel. Since fireplace screens are subjected to the full heat of the fireplace they must be made of durable materials. Perhaps the most common type of fireplace screen is the mesh spark arrestor made of finely wrought interlinked chains, which are hung from a rod suspended from the lintel inside the fireplace opening. The screens can be drawn shut like a curtain when needed or opened when the fireplace is not in use.