Henriette Fireplace February 10th, 2018 - 12:52:51
Once you have removed all the dirt and soot, you may decide to add an extra sparkle to your freshly cleaned fireplace tools. You can do this by polishing with a brass polisher. Follow all label instructions and warnings when applying this to your tools. You can now enjoy your clean fireplace for the rest of the season, without worrying about flying dust or ash or about a dangerous creosote fire breaking out in the fireplace. Do not forget to close the flue to prevent any drafts and to keep your firebox free from debris. Decorating your fireplace is a pleasure once it is all clean. The fun part is deciding what you will use. How about creating a fresh look for your fireplace by getting a new fireplace screen? There are so many options out there as far as design and style. Some of my favorites are single panel fireplace screens. With a single panel fireplace screen, you do not need to have much room on your hearth. Because it is a flat fireplace screen, it can sit right up against the firebox and takes up very little precious space. As for the design, how about adding the fresh look of spring with a leaf fireplace screen? If you really love that look, you can even get a matching leaf fireplace tool set and log holder to go with it!
The next step is to clean those well-used fireplace tools and fireplace grate. Black soot and resin can easily build up on your tools and can make them unsightly and grungy-looking. Here are a few simple steps to help bring back their original luster and shine. Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface.
This is not the case, heat from your fireplace will radiate out through the glass even if the glass-doors are closed, so a good way to use your glass-doors is to burn the fireplace with the glass-doors open and the safety screen closed. In this way you have all the beauty and ambience of your fire before you. If your fireplace is equipped with outside air or make up air you can also burn the fireplace with the glass doors shut and the safety screen open, in this mode you will be able to see your beautiful fire and feel the radiant heat, but not be losing any of the air in the room up the chimney. Make up air or outside air can be installed on most fireplaces if you dont have it in your fireplace now. These two things will also overcome the reasons that some fireplaces smoke, and also why your fireplace has a drafty smokey smell to it when it is not being used. Just for those two reasons every fireplace should have glass-doors installed on them.
The Corner Fireplace Traditionally, fireplaces go in the center of the wall. But, we have evolved into forward thinking visionaries. We are no longer limited by the way things have always been. We put fireplaces in the corner. With a fireplace insert and some building supplies, you can have a fireplace that is more unique than the one your best friend has. You can either learn how to do it yourself, because it is completely safe when you use a fireplace insert with gel fuel, or you can ask a friend of yours to help you. Its that easy. Middle of the Room Why have it along the wall? Why have it in the corner, even though that is a great idea? Why not put a fireplace in the middle of the room? You hardly need any supplies from the hardware store. Build a simple brick or rock structure for your fireplace insert and you have the neatest indoor fireplace you have ever seen.