Henriette Fireplace November 25th, 2017 - 13:11:13
Once you have finished cleaning your chimney, the next step in cleaning your fireplace to prepare it for the coming warmer months, is to clean out the firebox. You will need to give your firebox walls a good brushing with a nice stiff brush. Knock down all the loose soot and ash that has gotten stuck to the brick walls and flue. Remove your fireplace grate and set it to the side on a newspaper. Keep it from touching your finished flooring, as it will leave a nice sooty footprint. You will clean this and your other fireplace tools in the next step. Using your fireplace shovel, you will need to scoop out as much of the completely cooled ash and the chunks of unburned wood as you can. Using your fireplace brush, sweep the remainder of the ash onto your shovel and into an ash bucket.
The best reason I have saved for last and that is, your fireplace is costing you heat loss all day and night even when your not using it. The reason is that your damper in your fireplace is not airtight they are made that way to maintain a certain amount of clearance even when they are closed. So If you have a fireplace that does not have a glass-door you are wasting energy, up and out the chimney. In this article its easy to see how you can get more heat out of your fireplace with just a few small changes, that will let you burn outside air instead of the air that you already paid to heat, and by installing glass-doors to stop heat loss.
4. Take Your Fireplace Candelabra Outside - Candelabra made for your fireplace are usually pretty sturdy. They are generally made out of wrought-iron or some other very durable material. This makes them ideal for use outside. Try using your fireplace candelabra as a centerpiece on your patio table. If you have a long picnic table, you can use a candelabrum that is designed for a smaller fireplace. How about using a couple candelabra to decorate either side of your front door, or back door? If you are worried about your candles blowing out from gusts of wind, you can use votive candles surrounded by glass, but your candelabra cannot have center pins for this to work.
The first thing that you would want to know about your fireplace is it in good working order? As a masonry contractor in the Seattle area we see quite a few chimney every year that are unsafe to burn and need to be repaired. Some of the things that you would want to look for would be, if the fireplace needs repair or has loose brick, smoking problems, water damage, or damper problems. One of the best ways to see if your fireplace is ready to burn is to ask for an inspection from a masonry contractor in your area. Now is the time to start that fire, and as we said above we want the fireplace to burn in an efficient way.