Henriette Fireplace February 17th, 2018 - 07:23:14
Once you have finished cleaning your chimney, the next step in cleaning your fireplace to prepare it for the coming warmer months, is to clean out the firebox. You will need to give your firebox walls a good brushing with a nice stiff brush. Knock down all the loose soot and ash that has gotten stuck to the brick walls and flue. Remove your fireplace grate and set it to the side on a newspaper. Keep it from touching your finished flooring, as it will leave a nice sooty footprint. You will clean this and your other fireplace tools in the next step. Using your fireplace shovel, you will need to scoop out as much of the completely cooled ash and the chunks of unburned wood as you can. Using your fireplace brush, sweep the remainder of the ash onto your shovel and into an ash bucket.
The first thing that you would want to know about your fireplace is it in good working order? As a masonry contractor in the Seattle area we see quite a few chimney every year that are unsafe to burn and need to be repaired. Some of the things that you would want to look for would be, if the fireplace needs repair or has loose brick, smoking problems, water damage, or damper problems. One of the best ways to see if your fireplace is ready to burn is to ask for an inspection from a masonry contractor in your area. Now is the time to start that fire, and as we said above we want the fireplace to burn in an efficient way.
Cast Iron Fireplaces Those who have homes with very little room for a fireplace will like the cast iron fireplaces. This type can be put up in a home using just a cement slab, the size of the fireplace and a fire proof stone wall at the back. It will require venting into a chimney, or outside, according to your municipal codes. Cast iron fireplaces and stoves are perfect for small areas. Cast iron fireplaces create a smokeless fuel fire so they are appropriate for interiors. Traditional Fireplaces The most recognizable type of fireplace is the typical "wall-mounted" design found in living rooms, dens, and even bedrooms. It may be consisted of brick, cement, stone, ceramic, or some mixture of these materials. The opening will typically be covered with a metal or glass screen of some type. Fireplaces of this kind often are surrounded by an exterior mantle, which can be made of wood, stone, brick, marble, metal, or some other material. Mantle styles can vary from unadorned to stylish to ornate to fanciful. Due to their importance, they often set the decorative tone for the whole room. Mostly they use wood for fuel, but some can also burn peat, coal, and other materials. Fireplaces of this type are not for the most part energy-efficient.
While other fireplaces & accessories look better when they are clean and shiny, the rustic charm of wrought iron or antique brass cannot be discounted. These metals on fireplace tools and door frames make them virtually maintenance-free because they do not have to be completely shiny to look good. However, these metals have a tendency to heat up, so it is highly recommended that a pair of kitchen mittens be kept nearby in case one has to open the hot doors. As an aid in making a purchase, one should take a picture of the fireplace and hearth, along with the fireplace tools, and take it to the home improvement center. The picture will help the buyer visualize the room and select the right fireplace door to fit the décor.