Henriette Fireplace October 18th, 2017 - 12:20:50
The next step is to clean those well-used fireplace tools and fireplace grate. Black soot and resin can easily build up on your tools and can make them unsightly and grungy-looking. Here are a few simple steps to help bring back their original luster and shine. Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface.
If you decide that cleaning your chimney from the top will work better for you, you will need to have a long piece of rope and some type of weight attached to the bottom of the chimney brush. Again, as you work the brush through the chimney, use a back and forth motion to be sure you are scraping off as much creosote as possible. If you do choose to use this method, make sure that you do it with safety precautions in place. Falling off the roof is never a good idea! Chimney sweeps are another excellent option for cleaning your chimney. These professionals can make sure that all aspects of your chimney are up to safety standards. Look for a CSIA Certified Chimney Sweep in your area to ensure that your fireplace is properly cared for.
While it is true that a fireplace insert is great for bringing life back to that old traditional or gas fireplace you have sitting dormant in the living room, a fireplace insert can do so much more for your home. If you have ever looked around your home and wondered how much it would cost to put a fireplace in a certain wall, room or area, you will be surprised when you hear the answer. While construction and labor costs for a traditional or gas fireplace can cost upwards of ten thousand dollars, you can actually have a fireplace built for merely hundreds if you use a fireplace insert and some materials from your local hardware store. Now, I cant deny that it is nice to have a wall mounted gas fireplace that lights with a simple remote. But, a wall mounted gel fireplace can be installed in merely hours for thousands of dollars less.
While these screens will not stop a rolling log they will protect areas outside the hearth from flying sparks from popping wood sap. One of the greatest advantages to mesh screens is that they require no extra space or braces and do not extend past the flush face of the fireplace. Another very common type of fireplace screen is made of iron, brass or steel and mounts in front of or on the hearth free-standing in front of the firebox. These fireplace screens can be a simple flat screen, might be free standing on leg-brackets and could be the more common three-sided screen. Three-sided screens have a center section that spans the width of the fireplace. The two sides are hinged to turn at a thirty to forty-five degree angle thus holding the screen plum straight up. The fireplace screen can have fireplace tools, candles and all manner of artistic décor built into the design.