Home / Fireplace / town and country fireplaces / Town And Country Tc42 Series C Town And Country Fireplace Remote Control Instructions Town And Country Tc36 Town And Country Ws54 Price Town And Country Fireplace Tc42 Price
Henriette Fireplace February 09th, 2018 - 12:21:21
This is not the case, heat from your fireplace will radiate out through the glass even if the glass-doors are closed, so a good way to use your glass-doors is to burn the fireplace with the glass-doors open and the safety screen closed. In this way you have all the beauty and ambience of your fire before you. If your fireplace is equipped with outside air or make up air you can also burn the fireplace with the glass doors shut and the safety screen open, in this mode you will be able to see your beautiful fire and feel the radiant heat, but not be losing any of the air in the room up the chimney. Make up air or outside air can be installed on most fireplaces if you dont have it in your fireplace now. These two things will also overcome the reasons that some fireplaces smoke, and also why your fireplace has a drafty smokey smell to it when it is not being used. Just for those two reasons every fireplace should have glass-doors installed on them.
The next step is to clean those well-used fireplace tools and fireplace grate. Black soot and resin can easily build up on your tools and can make them unsightly and grungy-looking. Here are a few simple steps to help bring back their original luster and shine. Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface.
While it is true that a fireplace insert is great for bringing life back to that old traditional or gas fireplace you have sitting dormant in the living room, a fireplace insert can do so much more for your home. If you have ever looked around your home and wondered how much it would cost to put a fireplace in a certain wall, room or area, you will be surprised when you hear the answer. While construction and labor costs for a traditional or gas fireplace can cost upwards of ten thousand dollars, you can actually have a fireplace built for merely hundreds if you use a fireplace insert and some materials from your local hardware store. Now, I cant deny that it is nice to have a wall mounted gas fireplace that lights with a simple remote. But, a wall mounted gel fireplace can be installed in merely hours for thousands of dollars less.
Wood stoves built during the 1970s and early 1980s offer efficiencies of 50 to 60 percent. Those built since new governmental requirements were put in place in 1988 offer 75 percent or higher overall efficiency; that is, they convert up to 75 percent or more of their fuel into heat. Concern about particulate emissions or air pollution carried by wood smoke have also forced changes in wood stove designs. Although old wood stoves gave off up to 50 grams of particulates per hour in smoke, new certified stoves give off only about 5 grams. Most new wood stoves are energy efficient, environmentally friendly and come in many styles and colors. If you thought that wood stoves only came in black and belched smoke then think again. The new wood stoves are energy efficient, clean burning and there is a wood stove to fit any home or life style.