Home / Fireplace / town and country fireplaces / Town And Country Fireplace Tc36 Price Town And Country Fireplace Problems Town And Country Ws54 Price Town And Country Fireplace Remote Control Instructions Town And Country Fireplace Price List
Henriette Fireplace February 09th, 2018 - 12:19:13
1. Use Fabric to Decorate Your Fireplace Candelabra - Having fireplace candelabra lit in your fireplace can create a warm glow and an inviting flicker, but you will not always have your candles lit. So during the times when you do not, you can add a little color using fabric. Find a color and design that matches the rest of your home decor, and purchase a small amount; about a yard should be plenty. Simply wrap the fabric around and in and out of the spindles of the candelabrum. Let some of the fabric bunch and billow out at random intervals. Tuck in the ends and edges and you quickly have a beautiful centerpiece. Replace the candles, but remember to remove the fabric before lighting them.
If you decide that sitting next to the fireplace is the way to go, you will need to make sure you have enough chimney rods to span the entire length of your chimney. As you are sitting next to your fireplace, push your brush up through the flue. Continue to add more brush rods as needed until the brush is at the top of the chimney. As you pull the brush back down, you will need to make a back and forth motion to really scrub the creosote off the walls of the chimney. Be sure to shield your eyes, as some of this loosened creosote may fall into the firebox.
While other fireplaces & accessories look better when they are clean and shiny, the rustic charm of wrought iron or antique brass cannot be discounted. These metals on fireplace tools and door frames make them virtually maintenance-free because they do not have to be completely shiny to look good. However, these metals have a tendency to heat up, so it is highly recommended that a pair of kitchen mittens be kept nearby in case one has to open the hot doors. As an aid in making a purchase, one should take a picture of the fireplace and hearth, along with the fireplace tools, and take it to the home improvement center. The picture will help the buyer visualize the room and select the right fireplace door to fit the décor.
The next step is to clean those well-used fireplace tools and fireplace grate. Black soot and resin can easily build up on your tools and can make them unsightly and grungy-looking. Here are a few simple steps to help bring back their original luster and shine. Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface.