Henriette Fireplace February 13th, 2018 - 10:43:50
The Purpose of the Fireplace There are different reasons as to why you would need an electric fireplace and one of them can be to warm a living room or a particular room in the house. Therefore, chances are that you could end up having to choose between an electric heater and an electric fireplace. The truth is that both are quite demanding when it comes to electricity consumption and most the time, you cannot rely on an electric fireplace as a main source of heat. In fact, there are no assurances that the fireplace will increase the value of any home. In other words, electric fireplaces can have the best aesthetic value to any home whereby you can still use it to mimic the traditional fireplace without having it warm up the house. On the other hand, you also need to weigh the effectiveness of having such equipment in your home.
1. Use Fabric to Decorate Your Fireplace Candelabra - Having fireplace candelabra lit in your fireplace can create a warm glow and an inviting flicker, but you will not always have your candles lit. So during the times when you do not, you can add a little color using fabric. Find a color and design that matches the rest of your home decor, and purchase a small amount; about a yard should be plenty. Simply wrap the fabric around and in and out of the spindles of the candelabrum. Let some of the fabric bunch and billow out at random intervals. Tuck in the ends and edges and you quickly have a beautiful centerpiece. Replace the candles, but remember to remove the fabric before lighting them.
The first thing that you would want to know about your fireplace is it in good working order? As a masonry contractor in the Seattle area we see quite a few chimney every year that are unsafe to burn and need to be repaired. Some of the things that you would want to look for would be, if the fireplace needs repair or has loose brick, smoking problems, water damage, or damper problems. One of the best ways to see if your fireplace is ready to burn is to ask for an inspection from a masonry contractor in your area. Now is the time to start that fire, and as we said above we want the fireplace to burn in an efficient way.
There are three different styles of gas fireplaces: the direct vent model, the top vent design, and the vent-free model. The direct vent gas fireplace uses two vent pipes that lead directly to the outside. One pipe uses combustion air from the outside while the other vents the exhaust gas. The top vent gas fireplace design can be installed into existing fireplaces and uses the metal or brick chimney as the exhaust vent. The combustion air for top vent fireplaces is drawn from inside the home while the chimney vents the exhaust gas. The vent-free gas fireplace model uses no exhaust vent. This style includes an oxygen-depletion sensor that turns off the gas if it senses a dangerous lack of oxygen inside the house. While fireplace manufacturers claim that vent-free fireplaces burn clean, are energy-efficient and dont threaten indoor air quality, be aware that a number of states do not permit the installation of vent-free fireplaces. In the New England states of New Hampshire, Massachusetts, Vermont, Maine and Connecticut installation of vent-free gas fireplaces is permitted. Massachusetts has in the past not authorized the installation of vent free gas fireplaces for safety reasons.