Henriette Fireplace February 13th, 2018 - 10:49:08
While these screens will not stop a rolling log they will protect areas outside the hearth from flying sparks from popping wood sap. One of the greatest advantages to mesh screens is that they require no extra space or braces and do not extend past the flush face of the fireplace. Another very common type of fireplace screen is made of iron, brass or steel and mounts in front of or on the hearth free-standing in front of the firebox. These fireplace screens can be a simple flat screen, might be free standing on leg-brackets and could be the more common three-sided screen. Three-sided screens have a center section that spans the width of the fireplace. The two sides are hinged to turn at a thirty to forty-five degree angle thus holding the screen plum straight up. The fireplace screen can have fireplace tools, candles and all manner of artistic décor built into the design.
This is not the case, heat from your fireplace will radiate out through the glass even if the glass-doors are closed, so a good way to use your glass-doors is to burn the fireplace with the glass-doors open and the safety screen closed. In this way you have all the beauty and ambience of your fire before you. If your fireplace is equipped with outside air or make up air you can also burn the fireplace with the glass doors shut and the safety screen open, in this mode you will be able to see your beautiful fire and feel the radiant heat, but not be losing any of the air in the room up the chimney. Make up air or outside air can be installed on most fireplaces if you dont have it in your fireplace now. These two things will also overcome the reasons that some fireplaces smoke, and also why your fireplace has a drafty smokey smell to it when it is not being used. Just for those two reasons every fireplace should have glass-doors installed on them.
Improve your fireplaces heat efficiency by 25% or more just by doing a few simple things, you can improve the efficiency of your fireplace and get more heat out of your fireplace, while enjoying the ambience and beauty of a wood-burning fireplace that is already in your home. If you have a little working knowledge of fireplaces, then you can understand why improving the amount of heat that a fireplace puts out is important to the over all enjoyment of having a fireplace in your home. If you are new to burning real wood-burning fireplaces, there are some very simple ways to improve the amount of heat that your fireplace will produce.
Cast Iron Fireplaces Those who have homes with very little room for a fireplace will like the cast iron fireplaces. This type can be put up in a home using just a cement slab, the size of the fireplace and a fire proof stone wall at the back. It will require venting into a chimney, or outside, according to your municipal codes. Cast iron fireplaces and stoves are perfect for small areas. Cast iron fireplaces create a smokeless fuel fire so they are appropriate for interiors. Traditional Fireplaces The most recognizable type of fireplace is the typical "wall-mounted" design found in living rooms, dens, and even bedrooms. It may be consisted of brick, cement, stone, ceramic, or some mixture of these materials. The opening will typically be covered with a metal or glass screen of some type. Fireplaces of this kind often are surrounded by an exterior mantle, which can be made of wood, stone, brick, marble, metal, or some other material. Mantle styles can vary from unadorned to stylish to ornate to fanciful. Due to their importance, they often set the decorative tone for the whole room. Mostly they use wood for fuel, but some can also burn peat, coal, and other materials. Fireplaces of this type are not for the most part energy-efficient.