Henriette Fireplace February 13th, 2018 - 10:44:05
There are actually several good ways to clean out a chimney. One is to purchase a chimney brush that matches your size and type of chimney. These brushes are specially designed for cleaning out chimneys, but you need to make sure you have the right size for your specific chimney. Also, if you have a brick and mortar chimney you should use a wire brush, whereas if your chimney is prefab, you should use a brush with poly bristles. The shape of your chimney is also important in considering which brush to buy. Some chimneys are square or rectangle, while others are round. Once you have determined which brush is best for your chimney, you need to decide whether you are more comfortable climbing up on top of your roof to clean or sitting next to your fireplace.
The best reason I have saved for last and that is, your fireplace is costing you heat loss all day and night even when your not using it. The reason is that your damper in your fireplace is not airtight they are made that way to maintain a certain amount of clearance even when they are closed. So If you have a fireplace that does not have a glass-door you are wasting energy, up and out the chimney. In this article its easy to see how you can get more heat out of your fireplace with just a few small changes, that will let you burn outside air instead of the air that you already paid to heat, and by installing glass-doors to stop heat loss.
The flat screen fire-screen can be made of one, two, three or four panels. It might fold up neatly when not in use or may be so aesthetically pleasing that hiding it is undesirable. While a fire-screen serves a clearly defined use-value when used in conjunction with a wood-burning fireplace most homeowners who own gas log fireplaces also use fire-screens. The fire-screen serves as an obstruction to children and pets but is often purchased for its decorative qualities. Fitting a fireplace screen such as the flat panel variety may be relatively easy, as they are not designed to fit flush to the fireplace and can easily over-lap the fireplace width and still look attractive and serve the function of containing sparks on one side and fingers on the other. Not all older brick or cement fireplaces are of a consistent size because most of these fireplaces are built on site as custom designs. While newer fireplace designs are fitted around a standardized firebox, older fireplaces were built custom on site. Newer fireplaces that are customized inside the home use a steel firebox with insulation, heat shields and fire brick already installed. The fire box can be built into a mantle or into a wall of the home with little to no safety features necessary for full functionality.
Gas fireplace inserts utilize natural gas or liquid propane as the fuel source and consist of a gas log set installed into a steel or cast iron stove and are usually sealed on the front with glass. Most gas inserts have fans or blowers that automatically circulate the heat. Gas inserts are available with remote controls, wall switches or wall-mounted thermostats. Wood-burning fireplace inserts use firewood as the fuel source. Wood inserts come with fans or blowers that automatically circulate the heat. Wood burning inserts would typically include an operable glass door in the front to allow for loading of firewood and flame viewing. Wood inserts vary in size of flame viewing area (the bigger the better) and maximum log length that can be inserted into the stove for burning.