Henriette Firepit February 26th, 2018 - 13:47:57
The reinforced concrete was poured to a depth of 100mm, allowing the firepit lining stones to protrude 100mm above it, with a slope of 1:100 away from the pit. Letting the concrete cure for a week, we then laid out random limestone pieces to gauge the best arrangement. Random stone comes in varying thicknesses and sizes and takes a great deal of patience to lay properly. You can simply start laying and choose matching pieces, filling in the many small gaps with small pieces but we prefer to shape the stones so that gaps are consistent and the small pieces are minimal. Once the stone was shaped and mortared down the gaps were grouted with mortar, coloured to match the stone. The final thing was sealing the limestone with a good quality stone sealant. And there is your party feature! When you light a fire and let it burn for a few hours the limestone patio begins to heat up and radiate to the surrounding seats making a very cosy spot on a cool autumn evening.
Procedure: First, we excavated a pit approximately 1metre (3 feet) in diameter and 800mm deep. The ground we were working on was very rocky so we used a backhoe and it was difficult to carve a smooth hole as you can see by the photos. Next we dug a drainage channel from the bottom of the hole to a lower point beyond the extent of the fire area. This was essential in this circumstance due to the heavy rainfall and the heavy soil. If your soil is porous it may not be necessary to provide drainage to the pit. In the channel we laid the plastic drainage pipe and covered it with gravel. Because we wanted to line the pit with the 600mm granite slabs we placed extra gravel in the bottom of the pit to set the stones on upright in a circle.
This is simple a matter of taste and often taste is developed from past experiences. By the same token, some people prefer to have the warmth and aroma provided by a firepit that uses wood as fuel while others think there is nothing better than a gas fire that does not require all the cleaning that goes with the ashes created when wood is burned. There are lots of other reasons for the different selections that people make. The one thing that remains the same with just about everyone, and that is the fact that we all love the idea of being able to get away from the hustle and bustle of everyday life and escape to a relaxing retreat. What could be more satisfying than creating that retreat in your own backyard with a beautiful firepit and some amazing outdoor furniture? Melissa Anne has been a freelance writer for several years. She has written about numerous topics, including outdoor decor.
When you buy a new copper firepit there are some safety issues that you will want to follow. One of the most important things to keep in mind is the weather. If your area has issued a fire warning of any type you wont want to start a fire outdoors. In dry areas it is better to be safe than to be sorry. If there is no fire warning remember also that you need to keep your fire under control. Make sure that your fire doesnt get too big, and keep a screen on the firepit so that there wont be any burning embers or ashes flying away from the fire.