Home / Fireplace / painted brick fireplace before and after images ideas / Best Color To Paint Brick Fireplace Grey Wash Stone Fireplace How To Make Exterior Brick Look Like Stone Floor To Ceiling Brick Fireplace Makeover How To Paint A Brick Fireplace Before And After Pictures
Henriette Fireplace February 15th, 2018 - 10:18:09
While these screens will not stop a rolling log they will protect areas outside the hearth from flying sparks from popping wood sap. One of the greatest advantages to mesh screens is that they require no extra space or braces and do not extend past the flush face of the fireplace. Another very common type of fireplace screen is made of iron, brass or steel and mounts in front of or on the hearth free-standing in front of the firebox. These fireplace screens can be a simple flat screen, might be free standing on leg-brackets and could be the more common three-sided screen. Three-sided screens have a center section that spans the width of the fireplace. The two sides are hinged to turn at a thirty to forty-five degree angle thus holding the screen plum straight up. The fireplace screen can have fireplace tools, candles and all manner of artistic décor built into the design.
The flat screen fire-screen can be made of one, two, three or four panels. It might fold up neatly when not in use or may be so aesthetically pleasing that hiding it is undesirable. While a fire-screen serves a clearly defined use-value when used in conjunction with a wood-burning fireplace most homeowners who own gas log fireplaces also use fire-screens. The fire-screen serves as an obstruction to children and pets but is often purchased for its decorative qualities. Fitting a fireplace screen such as the flat panel variety may be relatively easy, as they are not designed to fit flush to the fireplace and can easily over-lap the fireplace width and still look attractive and serve the function of containing sparks on one side and fingers on the other. Not all older brick or cement fireplaces are of a consistent size because most of these fireplaces are built on site as custom designs. While newer fireplace designs are fitted around a standardized firebox, older fireplaces were built custom on site. Newer fireplaces that are customized inside the home use a steel firebox with insulation, heat shields and fire brick already installed. The fire box can be built into a mantle or into a wall of the home with little to no safety features necessary for full functionality.
The first thing that you would want to know about your fireplace is it in good working order? As a masonry contractor in the Seattle area we see quite a few chimney every year that are unsafe to burn and need to be repaired. Some of the things that you would want to look for would be, if the fireplace needs repair or has loose brick, smoking problems, water damage, or damper problems. One of the best ways to see if your fireplace is ready to burn is to ask for an inspection from a masonry contractor in your area. Now is the time to start that fire, and as we said above we want the fireplace to burn in an efficient way.
While fireplaces accentuate the largeness of a room, the rooms do not all come in one size. For smaller rooms, like a childs bedroom, fireplaces were sometimes built in the corner of the room to exploit the space there. In fact, it is now easier to install a new fire place in the corner of a room because the fireplace walls could be tapered exactly just so in order to reflect the heat more efficiently into the room. A corner fireplace door is somewhat smaller than an ordinary fireplace door. They usually come in the traditional accordion-type frame because of the limited space offered by the walls. In choosing a fireplace door from the rack, the purchaser has to ensure that the door is big enough to cover the widest area of the fireplace opening without covering the whole mantle design. The door should overlap the whole fireplace opening in order to serve its purpose, but should not keep the fireplace itself from being seen and admired.