Home / Fireplace / outstanding gas fireplace installation photos inspirations / Fireplace Installation Contractors Ventless Gas Fireplace Installation Instructions Vent Free Gas Log Installation Replace Gas Fireplace Insert Cost
Henriette Fireplace February 10th, 2018 - 12:50:02
The next step is to clean those well-used fireplace tools and fireplace grate. Black soot and resin can easily build up on your tools and can make them unsightly and grungy-looking. Here are a few simple steps to help bring back their original luster and shine. Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface.
A fireplace glass door is installed on a fireplace to keep the room warm longer when the flames die down. Whether a wood burning fireplace or a gas burning fireplace, heat radiated into the room escapes through the chimney. One does not notice this while the fire is burning brightly, because of the heat from the flames that radiates into the room. However, when the fire starts to die down, the hearth becomes cold quickly as the heat escapes through the fireplace opening. To stop this from happening, a fireplace glass doors blocks the opening, keeping the warm air from leaving the room. Aside from keeping the warm air from escaping, the doors act to keep the hearth clean just as a fireplace screen used to do in the olden days. With the doors closed, ashes and embers dont scatter about the room, keeping the carpet or rug clean and scorch-free. The doors also have built in devices that divert air towards the bottom of the fireplace. These vents make the fire burn brighter and easier to light.
This is not the case, heat from your fireplace will radiate out through the glass even if the glass-doors are closed, so a good way to use your glass-doors is to burn the fireplace with the glass-doors open and the safety screen closed. In this way you have all the beauty and ambience of your fire before you. If your fireplace is equipped with outside air or make up air you can also burn the fireplace with the glass doors shut and the safety screen open, in this mode you will be able to see your beautiful fire and feel the radiant heat, but not be losing any of the air in the room up the chimney. Make up air or outside air can be installed on most fireplaces if you dont have it in your fireplace now. These two things will also overcome the reasons that some fireplaces smoke, and also why your fireplace has a drafty smokey smell to it when it is not being used. Just for those two reasons every fireplace should have glass-doors installed on them.
Fireplace screens can serve as spark arrestors for the wood burning fireplace and as decorative items or they can help protect a hearth floor area from rolling logs moving around as flames burn off a wood stack in the case of sturdier types of screens. Most screens are made of metal such as brass or more commonly wrought iron or steel. Since fireplace screens are subjected to the full heat of the fireplace they must be made of durable materials. Perhaps the most common type of fireplace screen is the mesh spark arrestor made of finely wrought interlinked chains, which are hung from a rod suspended from the lintel inside the fireplace opening. The screens can be drawn shut like a curtain when needed or opened when the fireplace is not in use.