Henriette Firepit February 27th, 2018 - 11:15:17
Procedure: First, we excavated a pit approximately 1metre (3 feet) in diameter and 800mm deep. The ground we were working on was very rocky so we used a backhoe and it was difficult to carve a smooth hole as you can see by the photos. Next we dug a drainage channel from the bottom of the hole to a lower point beyond the extent of the fire area. This was essential in this circumstance due to the heavy rainfall and the heavy soil. If your soil is porous it may not be necessary to provide drainage to the pit. In the channel we laid the plastic drainage pipe and covered it with gravel. Because we wanted to line the pit with the 600mm granite slabs we placed extra gravel in the bottom of the pit to set the stones on upright in a circle.
Choosing to put in an outdoor firepit is a pretty big undertaking. Its going to involve hours of work. Building an outdoor firepit is worth it though. A well designed firepit can make any back yard just pop. It provides a great gathering area for groups of friends and family. Before you grab your shovel though and start digging up the yard how about taking a few minutes to learn one part of how to build outdoor firepit: material selection. Lets look at the basics of a firepit. In its simplest form its just a hole in the ground. Chances are youll want something a little prettier than that though. So working from the inside out here are some of the materials you can use when figuring out how to build outdoor firepit.
The reinforced concrete was poured to a depth of 100mm, allowing the firepit lining stones to protrude 100mm above it, with a slope of 1:100 away from the pit. Letting the concrete cure for a week, we then laid out random limestone pieces to gauge the best arrangement. Random stone comes in varying thicknesses and sizes and takes a great deal of patience to lay properly. You can simply start laying and choose matching pieces, filling in the many small gaps with small pieces but we prefer to shape the stones so that gaps are consistent and the small pieces are minimal. Once the stone was shaped and mortared down the gaps were grouted with mortar, coloured to match the stone. The final thing was sealing the limestone with a good quality stone sealant. And there is your party feature! When you light a fire and let it burn for a few hours the limestone patio begins to heat up and radiate to the surrounding seats making a very cosy spot on a cool autumn evening.
Depending on how the weather turns, you may find that you enjoy sitting in the backyard at specific times of the year. It is not uncommon to consider different ways to improve your back patio or deck - maybe youve considered a gazebo or garden, or even a firepit to keep yourself warm on cooler evenings. Do you need a firepit to enhance your backyard entertaining, however? It can be a solid investment or a folly, but if you consider the pros and cons you will find youve made the right decision for home improvement. Here are a few points to consider if you have thought about installing a fire shoppe in your backyard: 1) How often do you sit out in the backyard? Do you think the addition of a firepit will inspire you to spend more time outside? The good thing about firepits is that you can use them year round - for cozy conversations during the fall and winter and marshmallow toasting and hot dog roasting in the summer.