Henriette Firepit February 27th, 2018 - 11:12:17
Its a bit tricky to get the heavy slabs in an exact circle with a consistent height but its best to prop them up and backfill with the gravel so that each stone is buried 150mm leaving a 450mm deep pit. The top of the granite should be 200mm above the surrounding ground level to allow for the concrete slab and paving. You could cut each stone lengthwise along one edge to make them fit flush with each other but it isnt necessary. The bottom of the pit was then paved to make shovelling out the ashes easier.
Your first step is, of course, to choose where your firepit will go. Pick an area that doesnt present a fire hazard and that will be comfortable for you and your guests to sit and relax. If, for example, you know one part of your yard is prone to mosquitoes, you would certainly want to avoid that spot. Just think practically, and you should be fine! When youve decided on the size and location of your pit, mark it using chalk or paint. If there is sod in the area, youll need to remove it, and you should also use a pre-emergent herbicide in order to prevent grass from growing in that area again.
There are other safety issues that you also need to consider when lighting a fire in a copper firepit. Never, ever leave a fire unattended, even for just a moment. Also make sure that any children that are with you keep a safe distance from the fire. Do not allow children to put anything into a burning fire, even if they claim that they know what they are doing. Dont allow children to stir the fire or to add wood or charcoal. Also keep a bucket of water handy in case you need to put the fire out quickly. With a few precautions, you can happily enjoy your new copper firepit for years to come. A little bit of common sense goes a long way. Remember that if something seems like a bad idea, it probably is. Fire can be dangerous, but it doesnt have to be. Use care and make sure that you dont get too close. Follow all directions that came with your firepit. Youll be glad that you did.
Gas Firepit Safety 1. You can help prevent accidental fires by keeping the area around your firepit free from combustible materials. This can include cleaning materials like mops, brooms, newspapers but more importantly, gasoline and cleaning fluids. 2. Inspect and clean burners regularly. Insects such as spiders can actually nest in the burners and block air flow. If this happens a fire can start behind the valve panel. 3. Be sure to keep electric cords and power supplies away from the fire pit. 4. Dont use your gas fire pit in a windy area. If you need to do so create a windbreak. 5. Never line a gas firepit with tin foil. 6. Dont use your firepit as a storage area for flammable materials or plastic items which can ignite. 7. Never leave children unattended around fire pit when in use.