Home / Fireplace / literarywondrous fireplace remodel before and after photo design / Fireplace Makeovers On A Budget Fireplace Makeover Diy Air Stone Over Brick Fireplace Painted Brick Fireplace Ideas
Henriette Fireplace February 11th, 2018 - 10:04:42
Gas fireplace inserts utilize natural gas or liquid propane as the fuel source and consist of a gas log set installed into a steel or cast iron stove and are usually sealed on the front with glass. Most gas inserts have fans or blowers that automatically circulate the heat. Gas inserts are available with remote controls, wall switches or wall-mounted thermostats. Wood-burning fireplace inserts use firewood as the fuel source. Wood inserts come with fans or blowers that automatically circulate the heat. Wood burning inserts would typically include an operable glass door in the front to allow for loading of firewood and flame viewing. Wood inserts vary in size of flame viewing area (the bigger the better) and maximum log length that can be inserted into the stove for burning.
Prefabricated Fireplaces Prefabricated fireplaces, also known as zero-clearance fireplaces, are highly insulated, so they can be installed within an inch of combustible materials, such as wall framing. They are preferred in new construction because theyre much lighter in weight, are faster and easier to install than standard masonry units, and are energy-efficient. Many newer prefabricated fireplaces are prefabricated from metal and installed in wood-frame walls. They generally have a metal shell and a realistic brick-lined firebox. Wood Stoves A wood stove is essentially a metal container for a fire. Made from cast iron or brick-lined, welded plate steel, a wood stove has an inlet for combustion air and an outlet for combustion gases, or smoke. Most modern wood stoves are airtight and allow the amount of combustion air that feeds the flame to be controlled. This control allows a wood stove to burn far more efficiently than a traditional open fireplace.
The flat screen fire-screen can be made of one, two, three or four panels. It might fold up neatly when not in use or may be so aesthetically pleasing that hiding it is undesirable. While a fire-screen serves a clearly defined use-value when used in conjunction with a wood-burning fireplace most homeowners who own gas log fireplaces also use fire-screens. The fire-screen serves as an obstruction to children and pets but is often purchased for its decorative qualities. Fitting a fireplace screen such as the flat panel variety may be relatively easy, as they are not designed to fit flush to the fireplace and can easily over-lap the fireplace width and still look attractive and serve the function of containing sparks on one side and fingers on the other. Not all older brick or cement fireplaces are of a consistent size because most of these fireplaces are built on site as custom designs. While newer fireplace designs are fitted around a standardized firebox, older fireplaces were built custom on site. Newer fireplaces that are customized inside the home use a steel firebox with insulation, heat shields and fire brick already installed. The fire box can be built into a mantle or into a wall of the home with little to no safety features necessary for full functionality.
They also use a forced-air system to distribute the wood pellet heat. Pellet-burning appliances are highly efficient, clean burning and environmentally friendly. Pellet stoves burn wood very efficiently and many do not need chimneys. Rather, they can exhaust fumes by venting directly through a wall to the outdoors. Pellet-burning appliances need to be refueled less frequently than most other wood burning appliances. Refueling varies from once a day to twice a week, depending on the model and your heating needs. Most pellet stoves require electricity to operate. Customizing Your Fireplace Your fireplace can be customized with a variety of functional and stylistic options. Gas fireplaces, for instance, feature three different kinds of logs: vented logs that provide a realistic burning wood look with less heat; ventless logs, which produce a yellow flame with a high degree of efficiency; and partially vented logs which provide a middle ground option in warmth, appearance and efficiency.