Home / Fireplace / lennox gas fireplace photo ideas / Regency Direct Vent Gas Fireplace Reviews Kozy Heat Fireplace Recall Lennox Gas Fireplace Troubleshooting Lennox Fireplaces Wood Burning Lennox Hearth Products Service
Henriette Fireplace February 15th, 2018 - 10:18:53
Cast Iron Fireplaces Those who have homes with very little room for a fireplace will like the cast iron fireplaces. This type can be put up in a home using just a cement slab, the size of the fireplace and a fire proof stone wall at the back. It will require venting into a chimney, or outside, according to your municipal codes. Cast iron fireplaces and stoves are perfect for small areas. Cast iron fireplaces create a smokeless fuel fire so they are appropriate for interiors. Traditional Fireplaces The most recognizable type of fireplace is the typical "wall-mounted" design found in living rooms, dens, and even bedrooms. It may be consisted of brick, cement, stone, ceramic, or some mixture of these materials. The opening will typically be covered with a metal or glass screen of some type. Fireplaces of this kind often are surrounded by an exterior mantle, which can be made of wood, stone, brick, marble, metal, or some other material. Mantle styles can vary from unadorned to stylish to ornate to fanciful. Due to their importance, they often set the decorative tone for the whole room. Mostly they use wood for fuel, but some can also burn peat, coal, and other materials. Fireplaces of this type are not for the most part energy-efficient.
This is not the case, heat from your fireplace will radiate out through the glass even if the glass-doors are closed, so a good way to use your glass-doors is to burn the fireplace with the glass-doors open and the safety screen closed. In this way you have all the beauty and ambience of your fire before you. If your fireplace is equipped with outside air or make up air you can also burn the fireplace with the glass doors shut and the safety screen open, in this mode you will be able to see your beautiful fire and feel the radiant heat, but not be losing any of the air in the room up the chimney. Make up air or outside air can be installed on most fireplaces if you dont have it in your fireplace now. These two things will also overcome the reasons that some fireplaces smoke, and also why your fireplace has a drafty smokey smell to it when it is not being used. Just for those two reasons every fireplace should have glass-doors installed on them.
Wood stoves built during the 1970s and early 1980s offer efficiencies of 50 to 60 percent. Those built since new governmental requirements were put in place in 1988 offer 75 percent or higher overall efficiency; that is, they convert up to 75 percent or more of their fuel into heat. Concern about particulate emissions or air pollution carried by wood smoke have also forced changes in wood stove designs. Although old wood stoves gave off up to 50 grams of particulates per hour in smoke, new certified stoves give off only about 5 grams. Most new wood stoves are energy efficient, environmentally friendly and come in many styles and colors. If you thought that wood stoves only came in black and belched smoke then think again. The new wood stoves are energy efficient, clean burning and there is a wood stove to fit any home or life style.
The first thing that you would want to know about your fireplace is it in good working order? As a masonry contractor in the Seattle area we see quite a few chimney every year that are unsafe to burn and need to be repaired. Some of the things that you would want to look for would be, if the fireplace needs repair or has loose brick, smoking problems, water damage, or damper problems. One of the best ways to see if your fireplace is ready to burn is to ask for an inspection from a masonry contractor in your area. Now is the time to start that fire, and as we said above we want the fireplace to burn in an efficient way.