Henriette Fireplace February 15th, 2018 - 10:17:33
The next step is to clean those well-used fireplace tools and fireplace grate. Black soot and resin can easily build up on your tools and can make them unsightly and grungy-looking. Here are a few simple steps to help bring back their original luster and shine. Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface.
An alternative to using a fireplace brush to get the rest of the ash out would be to use a vacuum. Make sure you use a vacuum that has a good filter on it, as ash has very tiny particles. Ash vacuums are specially designed with extra fine filters, so this would be a great option. It is not as messy as sweeping up all that ash, either! Another advantage to using ash vacuums is that you do not have to wait until your ashes and embers are completely cooled before vacuuming them up. Make sure you carefully read all labels and instructions on your specific ash vacuum. If you really want to do a deep cleaning, you can use a damp rag and wipe down the walls and floor of your firebox. This is completely optional and only for those who like that "white glove" test.
The Corner Fireplace Traditionally, fireplaces go in the center of the wall. But, we have evolved into forward thinking visionaries. We are no longer limited by the way things have always been. We put fireplaces in the corner. With a fireplace insert and some building supplies, you can have a fireplace that is more unique than the one your best friend has. You can either learn how to do it yourself, because it is completely safe when you use a fireplace insert with gel fuel, or you can ask a friend of yours to help you. Its that easy. Middle of the Room Why have it along the wall? Why have it in the corner, even though that is a great idea? Why not put a fireplace in the middle of the room? You hardly need any supplies from the hardware store. Build a simple brick or rock structure for your fireplace insert and you have the neatest indoor fireplace you have ever seen.
A fireplace glass door is installed on a fireplace to keep the room warm longer when the flames die down. Whether a wood burning fireplace or a gas burning fireplace, heat radiated into the room escapes through the chimney. One does not notice this while the fire is burning brightly, because of the heat from the flames that radiates into the room. However, when the fire starts to die down, the hearth becomes cold quickly as the heat escapes through the fireplace opening. To stop this from happening, a fireplace glass doors blocks the opening, keeping the warm air from leaving the room. Aside from keeping the warm air from escaping, the doors act to keep the hearth clean just as a fireplace screen used to do in the olden days. With the doors closed, ashes and embers dont scatter about the room, keeping the carpet or rug clean and scorch-free. The doors also have built in devices that divert air towards the bottom of the fireplace. These vents make the fire burn brighter and easier to light.