Home / Fireplace / impressive large fireplace screens that you must see / Extra Small Fireplace Doors Extra Wide Fireplace Screen Decorative Wrought Iron Fireplace Screens 55 Inch Fireplace Screen Fireplace Door Size Chart
Henriette Fireplace February 13th, 2018 - 10:48:28
This is not the case, heat from your fireplace will radiate out through the glass even if the glass-doors are closed, so a good way to use your glass-doors is to burn the fireplace with the glass-doors open and the safety screen closed. In this way you have all the beauty and ambience of your fire before you. If your fireplace is equipped with outside air or make up air you can also burn the fireplace with the glass doors shut and the safety screen open, in this mode you will be able to see your beautiful fire and feel the radiant heat, but not be losing any of the air in the room up the chimney. Make up air or outside air can be installed on most fireplaces if you dont have it in your fireplace now. These two things will also overcome the reasons that some fireplaces smoke, and also why your fireplace has a drafty smokey smell to it when it is not being used. Just for those two reasons every fireplace should have glass-doors installed on them.
Or spruce up your firebox and give it a little flare! Remove your fireplace screen, andirons and fireplace grate and replace them with beautiful fireplace candelabra. It sits right inside your fireplace where the fireplace grate normally sits. You can light the candles for a romantic evening glow without the heat of a full fire, or just leave them unlit and enjoy the beauty of the candelabra on its own. Decorate your mantel with some freshly picked spring flowers, like tulips or daffodils. Make it simple. You only need a few flowers carefully arranged in a nice glass vase to make a fresh and bold statement. Enjoy your fireplace year round, not just during the winter. It is a beautiful addition to your home that should not be forgotten! Have fun making your fireplace an inviting area to gather around, even without a roaring fire. Think outside the "fire"box!
The flat screen fire-screen can be made of one, two, three or four panels. It might fold up neatly when not in use or may be so aesthetically pleasing that hiding it is undesirable. While a fire-screen serves a clearly defined use-value when used in conjunction with a wood-burning fireplace most homeowners who own gas log fireplaces also use fire-screens. The fire-screen serves as an obstruction to children and pets but is often purchased for its decorative qualities. Fitting a fireplace screen such as the flat panel variety may be relatively easy, as they are not designed to fit flush to the fireplace and can easily over-lap the fireplace width and still look attractive and serve the function of containing sparks on one side and fingers on the other. Not all older brick or cement fireplaces are of a consistent size because most of these fireplaces are built on site as custom designs. While newer fireplace designs are fitted around a standardized firebox, older fireplaces were built custom on site. Newer fireplaces that are customized inside the home use a steel firebox with insulation, heat shields and fire brick already installed. The fire box can be built into a mantle or into a wall of the home with little to no safety features necessary for full functionality.
The first thing that you would want to know about your fireplace is it in good working order? As a masonry contractor in the Seattle area we see quite a few chimney every year that are unsafe to burn and need to be repaired. Some of the things that you would want to look for would be, if the fireplace needs repair or has loose brick, smoking problems, water damage, or damper problems. One of the best ways to see if your fireplace is ready to burn is to ask for an inspection from a masonry contractor in your area. Now is the time to start that fire, and as we said above we want the fireplace to burn in an efficient way.