Home / Firepit / grand effects fire pit with awesome design / Waterfall Fire Pit Combination Fire And Water Fountain Kit Fire And Water Feature Fire Pit With Water Feature Diy How To Build A Fire And Water Fountain
Henriette Firepit February 27th, 2018 - 11:22:31
If you are the do it yourself type and have the yard space, you can dig your own permanent firepit, lined with brick or natural stones. Plans for these type of pits are readily available online. Of course, you may not want to deal with the extra work involved in finding and hauling wood to burn in your outdoor fire-pit. If so, you might want to consider a natural gas, or propane model. On final note. Fire is nothing to play with. Make sure you take proper safety precautions and obey all regulations. Some jurisdictions place restrictions and may even prohibit outdoor fires of any kind.
Your next step is to start digging! Since youve already decided on the size of your firepit, all you have to do is dig an appropriately sized hole. Next, use bricks of the same height and place them at the surface level of the pit. From there, begin creating simple stacked rows, making sure to offset the vertical joints of each brick. When your pit has reached your desired and pre-planned height, youre ready to move on to the next step. Support the bricks you have laid by adding firmly packed soil around the area. You can also use gravel for the floor of the pit, smoothing as you add it in. Your final step is to add in top caps to the walls.
Buying a new copper firepit can be a great addition to any deck or backyard. Copper is a beautiful metal, and its long lasting and durable. Copper wont rust or corrode, unlike other metals, so your firepit will last for years and still look as good as the day you bought it. Another nice thing about copper is that it also conducts heat very well, so you will have a warm fire while burning less wood. Purchasing a firepit that is made of copper can be a very smart thing to do. Once you bring home your new copper firepit, youre going to want to think about accessories. One thing that is a very good idea is to buy a screen to place on top. This will help prevent hot ashes and burning embers from leaving the pit. Some firepits come with a screen, others may not so if yours doesnt have one you will want to think about purchasing one. You might also want to consider purchasing a lid to help put the fire out quicker at the end of the night.
Procedure: First, we excavated a pit approximately 1metre (3 feet) in diameter and 800mm deep. The ground we were working on was very rocky so we used a backhoe and it was difficult to carve a smooth hole as you can see by the photos. Next we dug a drainage channel from the bottom of the hole to a lower point beyond the extent of the fire area. This was essential in this circumstance due to the heavy rainfall and the heavy soil. If your soil is porous it may not be necessary to provide drainage to the pit. In the channel we laid the plastic drainage pipe and covered it with gravel. Because we wanted to line the pit with the 600mm granite slabs we placed extra gravel in the bottom of the pit to set the stones on upright in a circle.