Henriette Firepit February 27th, 2018 - 11:20:12
Procedure: First, we excavated a pit approximately 1metre (3 feet) in diameter and 800mm deep. The ground we were working on was very rocky so we used a backhoe and it was difficult to carve a smooth hole as you can see by the photos. Next we dug a drainage channel from the bottom of the hole to a lower point beyond the extent of the fire area. This was essential in this circumstance due to the heavy rainfall and the heavy soil. If your soil is porous it may not be necessary to provide drainage to the pit. In the channel we laid the plastic drainage pipe and covered it with gravel. Because we wanted to line the pit with the 600mm granite slabs we placed extra gravel in the bottom of the pit to set the stones on upright in a circle.
Once youve dug the hole you have 2 options, staying natural or a liner. Both have advantages and disadvantages. Leaving the pit bare saves you time and money. Once youre done digging all that you need to do is edge the hole. The biggest disadvantage to this method is that any rainstorm can wash out the sides of the pit and make it unstable. If youve decided to line the firepit then you have a few options. The cheapest method is to pour gravel into the hole and press it into the sides. Its a cheap affordable way to ensure proper drainage. The most expensive option is to brick and mortar the entire hole, while leaving drain holes in the bottom. Its an attractive solution, and youll never have to worry about one of the sides washing out.
You will want to use an appropriate adhesive material, such as mortar, to keep the caps firmly in place. Be sure to apply the caps only to dry surfaces and to keep them level during the process. Believe it or not, once youve done this, youre ready to try out your new firepit! Make sure to take proper care of your firepit so that you can enjoy it for many years to come. Always clean the ashes from your pit one day after use. If you have decided to paint your pit (using fire resistant paint, of course), it may need touch-ups from time to time to continue looking its best. Make sure that water is never used to put out fires, as this can cause the firepit to break down faster. Youll also want to invest in a good firepit cover for when the pit is not in use.
Many pieces of patio furniture often come with a table top firepit built right in. this arrangement may be well and good if all you are using one for is to generate a little heat of lighting for you and your friends, but what if you want one where you can cook as well. Sure, most homeowners who enjoy cooking outdoors already have a grill where they can prepare food for the entire neighborhood if that is what they wish to do, but when you have a firepit that will allow you to cook right off of it, and you already have it burning and glowing anyway, why fire up the grill as well when it is just the two of you and the kids. After all, everybody knows that kids can enjoy hotdogs and smores anytime. But when you are looking for a relaxing retreat in your backyard, you may not be thinking about the convenience of sitting down to a bun and mustard smashed between the walls of a bun, so lets see what else we can come up with for your home made retreat. There is no secret about it that each person has their own idea of what is relaxing to them. While one person may feel that copper is the best option for providing the ambiance that will help them to thoroughly enjoy their time outdoors, others may prefer the look and feel of a cast iron firepit.