Henriette Firepit February 27th, 2018 - 11:07:50
A firepit can be a beautiful addition to any yard. There are many different types of firepits available that are made of many different materials. One type of firepit that you will definitely want to consider is a copper firepit. Copper is a very attractive metal, but it is practical as well. Copper holds heat very well, it is an excellent conductor, meaning that you can use less wood. Another thing to keep in mind with copper is that it is a very durable metal. While some metals will corrode or rust, copper can withstand the elements. Copper firepits are practical as well as beautiful.
There are other safety issues that you also need to consider when lighting a fire in a copper firepit. Never, ever leave a fire unattended, even for just a moment. Also make sure that any children that are with you keep a safe distance from the fire. Do not allow children to put anything into a burning fire, even if they claim that they know what they are doing. Dont allow children to stir the fire or to add wood or charcoal. Also keep a bucket of water handy in case you need to put the fire out quickly. With a few precautions, you can happily enjoy your new copper firepit for years to come. A little bit of common sense goes a long way. Remember that if something seems like a bad idea, it probably is. Fire can be dangerous, but it doesnt have to be. Use care and make sure that you dont get too close. Follow all directions that came with your firepit. Youll be glad that you did.
Your next step is to start digging! Since youve already decided on the size of your firepit, all you have to do is dig an appropriately sized hole. Next, use bricks of the same height and place them at the surface level of the pit. From there, begin creating simple stacked rows, making sure to offset the vertical joints of each brick. When your pit has reached your desired and pre-planned height, youre ready to move on to the next step. Support the bricks you have laid by adding firmly packed soil around the area. You can also use gravel for the floor of the pit, smoothing as you add it in. Your final step is to add in top caps to the walls.
The reinforced concrete was poured to a depth of 100mm, allowing the firepit lining stones to protrude 100mm above it, with a slope of 1:100 away from the pit. Letting the concrete cure for a week, we then laid out random limestone pieces to gauge the best arrangement. Random stone comes in varying thicknesses and sizes and takes a great deal of patience to lay properly. You can simply start laying and choose matching pieces, filling in the many small gaps with small pieces but we prefer to shape the stones so that gaps are consistent and the small pieces are minimal. Once the stone was shaped and mortared down the gaps were grouted with mortar, coloured to match the stone. The final thing was sealing the limestone with a good quality stone sealant. And there is your party feature! When you light a fire and let it burn for a few hours the limestone patio begins to heat up and radiate to the surrounding seats making a very cosy spot on a cool autumn evening.