Henriette Firepit February 27th, 2018 - 11:09:25
Procedure: First, we excavated a pit approximately 1metre (3 feet) in diameter and 800mm deep. The ground we were working on was very rocky so we used a backhoe and it was difficult to carve a smooth hole as you can see by the photos. Next we dug a drainage channel from the bottom of the hole to a lower point beyond the extent of the fire area. This was essential in this circumstance due to the heavy rainfall and the heavy soil. If your soil is porous it may not be necessary to provide drainage to the pit. In the channel we laid the plastic drainage pipe and covered it with gravel. Because we wanted to line the pit with the 600mm granite slabs we placed extra gravel in the bottom of the pit to set the stones on upright in a circle.
So, on the different designs. One of the most common is a large bowl, usually metal, but sometimes ceramic, set on legs. You just set this up where you want you fire and you are good to go. Added features can include wheels, covers, screens and even grills for cooking. A nice twist on this design is the fire pit table, which adds are table-like ring around the outside of the pit. You can think of these as an outdoor table with a fire-pit built in. You have probably also seen a chiminea, which is more like a self-standing fireplace. These generally only have only one or two openings, rather than being open all around. While the classic chiminea is made from ceramic or terra cotta, they also come in copper or cast-iron.
Your next step is to start digging! Since youve already decided on the size of your firepit, all you have to do is dig an appropriately sized hole. Next, use bricks of the same height and place them at the surface level of the pit. From there, begin creating simple stacked rows, making sure to offset the vertical joints of each brick. When your pit has reached your desired and pre-planned height, youre ready to move on to the next step. Support the bricks you have laid by adding firmly packed soil around the area. You can also use gravel for the floor of the pit, smoothing as you add it in. Your final step is to add in top caps to the walls.
A firepit can be a beautiful addition to any yard. There are many different types of firepits available that are made of many different materials. One type of firepit that you will definitely want to consider is a copper firepit. Copper is a very attractive metal, but it is practical as well. Copper holds heat very well, it is an excellent conductor, meaning that you can use less wood. Another thing to keep in mind with copper is that it is a very durable metal. While some metals will corrode or rust, copper can withstand the elements. Copper firepits are practical as well as beautiful.