Henriette Fireplace February 16th, 2018 - 11:16:24
A fireplace glass door is installed on a fireplace to keep the room warm longer when the flames die down. Whether a wood burning fireplace or a gas burning fireplace, heat radiated into the room escapes through the chimney. One does not notice this while the fire is burning brightly, because of the heat from the flames that radiates into the room. However, when the fire starts to die down, the hearth becomes cold quickly as the heat escapes through the fireplace opening. To stop this from happening, a fireplace glass doors blocks the opening, keeping the warm air from leaving the room. Aside from keeping the warm air from escaping, the doors act to keep the hearth clean just as a fireplace screen used to do in the olden days. With the doors closed, ashes and embers dont scatter about the room, keeping the carpet or rug clean and scorch-free. The doors also have built in devices that divert air towards the bottom of the fireplace. These vents make the fire burn brighter and easier to light.
They also use a forced-air system to distribute the wood pellet heat. Pellet-burning appliances are highly efficient, clean burning and environmentally friendly. Pellet stoves burn wood very efficiently and many do not need chimneys. Rather, they can exhaust fumes by venting directly through a wall to the outdoors. Pellet-burning appliances need to be refueled less frequently than most other wood burning appliances. Refueling varies from once a day to twice a week, depending on the model and your heating needs. Most pellet stoves require electricity to operate. Customizing Your Fireplace Your fireplace can be customized with a variety of functional and stylistic options. Gas fireplaces, for instance, feature three different kinds of logs: vented logs that provide a realistic burning wood look with less heat; ventless logs, which produce a yellow flame with a high degree of efficiency; and partially vented logs which provide a middle ground option in warmth, appearance and efficiency.
If you decide that sitting next to the fireplace is the way to go, you will need to make sure you have enough chimney rods to span the entire length of your chimney. As you are sitting next to your fireplace, push your brush up through the flue. Continue to add more brush rods as needed until the brush is at the top of the chimney. As you pull the brush back down, you will need to make a back and forth motion to really scrub the creosote off the walls of the chimney. Be sure to shield your eyes, as some of this loosened creosote may fall into the firebox.
While these screens will not stop a rolling log they will protect areas outside the hearth from flying sparks from popping wood sap. One of the greatest advantages to mesh screens is that they require no extra space or braces and do not extend past the flush face of the fireplace. Another very common type of fireplace screen is made of iron, brass or steel and mounts in front of or on the hearth free-standing in front of the firebox. These fireplace screens can be a simple flat screen, might be free standing on leg-brackets and could be the more common three-sided screen. Three-sided screens have a center section that spans the width of the fireplace. The two sides are hinged to turn at a thirty to forty-five degree angle thus holding the screen plum straight up. The fireplace screen can have fireplace tools, candles and all manner of artistic décor built into the design.