Henriette Fireplace February 09th, 2018 - 12:14:11
While fireplaces accentuate the largeness of a room, the rooms do not all come in one size. For smaller rooms, like a childs bedroom, fireplaces were sometimes built in the corner of the room to exploit the space there. In fact, it is now easier to install a new fire place in the corner of a room because the fireplace walls could be tapered exactly just so in order to reflect the heat more efficiently into the room. A corner fireplace door is somewhat smaller than an ordinary fireplace door. They usually come in the traditional accordion-type frame because of the limited space offered by the walls. In choosing a fireplace door from the rack, the purchaser has to ensure that the door is big enough to cover the widest area of the fireplace opening without covering the whole mantle design. The door should overlap the whole fireplace opening in order to serve its purpose, but should not keep the fireplace itself from being seen and admired.
Pellet fireplace inserts use wood pellets or other types of pellets (corn based, soy based, etc.) as the fuel source. Pellet fireplace inserts come with fans or blowers that automatically circulate the heat. Pellet-Burning Hearth Appliances Pellet-burning hearth appliances are simpler to operate and more convenient than other wood-burning appliances. In fact, they are almost as easy to use as gas, oil or electric heaters. Pellet stoves and pellet inserts burn wood pellets or compressed wood. Pellet-burning hearth appliances are loaded with pellets through a hopper and the rate of burn is controlled by an electronic circuit board that is typically controlled by burn settings or a thermostat. Most pellet appliances have at least two burn settings and some new models use thermostats to control the fire.
There are three different styles of gas fireplaces: the direct vent model, the top vent design, and the vent-free model. The direct vent gas fireplace uses two vent pipes that lead directly to the outside. One pipe uses combustion air from the outside while the other vents the exhaust gas. The top vent gas fireplace design can be installed into existing fireplaces and uses the metal or brick chimney as the exhaust vent. The combustion air for top vent fireplaces is drawn from inside the home while the chimney vents the exhaust gas. The vent-free gas fireplace model uses no exhaust vent. This style includes an oxygen-depletion sensor that turns off the gas if it senses a dangerous lack of oxygen inside the house. While fireplace manufacturers claim that vent-free fireplaces burn clean, are energy-efficient and dont threaten indoor air quality, be aware that a number of states do not permit the installation of vent-free fireplaces. In the New England states of New Hampshire, Massachusetts, Vermont, Maine and Connecticut installation of vent-free gas fireplaces is permitted. Massachusetts has in the past not authorized the installation of vent free gas fireplaces for safety reasons.
An alternative to using a fireplace brush to get the rest of the ash out would be to use a vacuum. Make sure you use a vacuum that has a good filter on it, as ash has very tiny particles. Ash vacuums are specially designed with extra fine filters, so this would be a great option. It is not as messy as sweeping up all that ash, either! Another advantage to using ash vacuums is that you do not have to wait until your ashes and embers are completely cooled before vacuuming them up. Make sure you carefully read all labels and instructions on your specific ash vacuum. If you really want to do a deep cleaning, you can use a damp rag and wipe down the walls and floor of your firebox. This is completely optional and only for those who like that "white glove" test.