Henriette Fireplace February 09th, 2018 - 12:13:02
There are three different styles of gas fireplaces: the direct vent model, the top vent design, and the vent-free model. The direct vent gas fireplace uses two vent pipes that lead directly to the outside. One pipe uses combustion air from the outside while the other vents the exhaust gas. The top vent gas fireplace design can be installed into existing fireplaces and uses the metal or brick chimney as the exhaust vent. The combustion air for top vent fireplaces is drawn from inside the home while the chimney vents the exhaust gas. The vent-free gas fireplace model uses no exhaust vent. This style includes an oxygen-depletion sensor that turns off the gas if it senses a dangerous lack of oxygen inside the house. While fireplace manufacturers claim that vent-free fireplaces burn clean, are energy-efficient and dont threaten indoor air quality, be aware that a number of states do not permit the installation of vent-free fireplaces. In the New England states of New Hampshire, Massachusetts, Vermont, Maine and Connecticut installation of vent-free gas fireplaces is permitted. Massachusetts has in the past not authorized the installation of vent free gas fireplaces for safety reasons.
While it is true that a fireplace insert is great for bringing life back to that old traditional or gas fireplace you have sitting dormant in the living room, a fireplace insert can do so much more for your home. If you have ever looked around your home and wondered how much it would cost to put a fireplace in a certain wall, room or area, you will be surprised when you hear the answer. While construction and labor costs for a traditional or gas fireplace can cost upwards of ten thousand dollars, you can actually have a fireplace built for merely hundreds if you use a fireplace insert and some materials from your local hardware store. Now, I cant deny that it is nice to have a wall mounted gas fireplace that lights with a simple remote. But, a wall mounted gel fireplace can be installed in merely hours for thousands of dollars less.
Fireplace Inserts If you have a masonry fireplace but dont like the associated, draftiness, energy costs or overall inefficiency, you should consider purchasing a fireplace insert, sometimes referred to as a fireplace stove insert. A fireplace insert is basically a wood stove designed to fit into a fireplace. Fireplace inserts are usually constructed of cast iron or steel just like wood stoves. Installing a fireplace insert will typically require the installation of a chimney liner. The chimney liner essentially narrows and insulates the chimney vent and connects directly onto the fireplace insert creating a closed highly efficient system. No more opening and closing the damper. Fireplace inserts can use various fuel options and are clean burning (minimal smoke and particulate emissions). Fireplace inserts like wood stoves are heavy, usually weighing upwards of 300 pounds. This means delivery and installation are better left to certified installers or professional chimney sweeps.
Once you have finished cleaning your chimney, the next step in cleaning your fireplace to prepare it for the coming warmer months, is to clean out the firebox. You will need to give your firebox walls a good brushing with a nice stiff brush. Knock down all the loose soot and ash that has gotten stuck to the brick walls and flue. Remove your fireplace grate and set it to the side on a newspaper. Keep it from touching your finished flooring, as it will leave a nice sooty footprint. You will clean this and your other fireplace tools in the next step. Using your fireplace shovel, you will need to scoop out as much of the completely cooled ash and the chunks of unburned wood as you can. Using your fireplace brush, sweep the remainder of the ash onto your shovel and into an ash bucket.