Henriette Fireplace November 01st, 2017 - 12:21:07
4. Take Your Fireplace Candelabra Outside - Candelabra made for your fireplace are usually pretty sturdy. They are generally made out of wrought-iron or some other very durable material. This makes them ideal for use outside. Try using your fireplace candelabra as a centerpiece on your patio table. If you have a long picnic table, you can use a candelabrum that is designed for a smaller fireplace. How about using a couple candelabra to decorate either side of your front door, or back door? If you are worried about your candles blowing out from gusts of wind, you can use votive candles surrounded by glass, but your candelabra cannot have center pins for this to work.
The Purpose of the Fireplace There are different reasons as to why you would need an electric fireplace and one of them can be to warm a living room or a particular room in the house. Therefore, chances are that you could end up having to choose between an electric heater and an electric fireplace. The truth is that both are quite demanding when it comes to electricity consumption and most the time, you cannot rely on an electric fireplace as a main source of heat. In fact, there are no assurances that the fireplace will increase the value of any home. In other words, electric fireplaces can have the best aesthetic value to any home whereby you can still use it to mimic the traditional fireplace without having it warm up the house. On the other hand, you also need to weigh the effectiveness of having such equipment in your home.
The next step is to clean those well-used fireplace tools and fireplace grate. Black soot and resin can easily build up on your tools and can make them unsightly and grungy-looking. Here are a few simple steps to help bring back their original luster and shine. Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface.
Once you have removed all the dirt and soot, you may decide to add an extra sparkle to your freshly cleaned fireplace tools. You can do this by polishing with a brass polisher. Follow all label instructions and warnings when applying this to your tools. You can now enjoy your clean fireplace for the rest of the season, without worrying about flying dust or ash or about a dangerous creosote fire breaking out in the fireplace. Do not forget to close the flue to prevent any drafts and to keep your firebox free from debris. Decorating your fireplace is a pleasure once it is all clean. The fun part is deciding what you will use. How about creating a fresh look for your fireplace by getting a new fireplace screen? There are so many options out there as far as design and style. Some of my favorites are single panel fireplace screens. With a single panel fireplace screen, you do not need to have much room on your hearth. Because it is a flat fireplace screen, it can sit right up against the firebox and takes up very little precious space. As for the design, how about adding the fresh look of spring with a leaf fireplace screen? If you really love that look, you can even get a matching leaf fireplace tool set and log holder to go with it!