Charmaine Suarez Fireplace February 18th, 2018 - 08:54:53
4. Take Your Fireplace Candelabra Outside - Candelabra made for your fireplace are usually pretty sturdy. They are generally made out of wrought-iron or some other very durable material. This makes them ideal for use outside. Try using your fireplace candelabra as a centerpiece on your patio table. If you have a long picnic table, you can use a candelabrum that is designed for a smaller fireplace. How about using a couple candelabra to decorate either side of your front door, or back door? If you are worried about your candles blowing out from gusts of wind, you can use votive candles surrounded by glass, but your candelabra cannot have center pins for this to work.
Once you have removed all the dirt and soot, you may decide to add an extra sparkle to your freshly cleaned fireplace tools. You can do this by polishing with a brass polisher. Follow all label instructions and warnings when applying this to your tools. You can now enjoy your clean fireplace for the rest of the season, without worrying about flying dust or ash or about a dangerous creosote fire breaking out in the fireplace. Do not forget to close the flue to prevent any drafts and to keep your firebox free from debris. Decorating your fireplace is a pleasure once it is all clean. The fun part is deciding what you will use. How about creating a fresh look for your fireplace by getting a new fireplace screen? There are so many options out there as far as design and style. Some of my favorites are single panel fireplace screens. With a single panel fireplace screen, you do not need to have much room on your hearth. Because it is a flat fireplace screen, it can sit right up against the firebox and takes up very little precious space. As for the design, how about adding the fresh look of spring with a leaf fireplace screen? If you really love that look, you can even get a matching leaf fireplace tool set and log holder to go with it!
The first thing that you would want to know about your fireplace is it in good working order? As a masonry contractor in the Seattle area we see quite a few chimney every year that are unsafe to burn and need to be repaired. Some of the things that you would want to look for would be, if the fireplace needs repair or has loose brick, smoking problems, water damage, or damper problems. One of the best ways to see if your fireplace is ready to burn is to ask for an inspection from a masonry contractor in your area. Now is the time to start that fire, and as we said above we want the fireplace to burn in an efficient way.
While these screens will not stop a rolling log they will protect areas outside the hearth from flying sparks from popping wood sap. One of the greatest advantages to mesh screens is that they require no extra space or braces and do not extend past the flush face of the fireplace. Another very common type of fireplace screen is made of iron, brass or steel and mounts in front of or on the hearth free-standing in front of the firebox. These fireplace screens can be a simple flat screen, might be free standing on leg-brackets and could be the more common three-sided screen. Three-sided screens have a center section that spans the width of the fireplace. The two sides are hinged to turn at a thirty to forty-five degree angle thus holding the screen plum straight up. The fireplace screen can have fireplace tools, candles and all manner of artistic décor built into the design.