Home / Fireplace / fireplace glass door replacement with awesome design / Non Masonry Fireplace Doors Fireplace Glass Cracked Iron Fireplace Doors Extra Large Fireplace Doors Fireplace Door Size Chart
Henriette Fireplace February 13th, 2018 - 10:47:19
There are three different styles of gas fireplaces: the direct vent model, the top vent design, and the vent-free model. The direct vent gas fireplace uses two vent pipes that lead directly to the outside. One pipe uses combustion air from the outside while the other vents the exhaust gas. The top vent gas fireplace design can be installed into existing fireplaces and uses the metal or brick chimney as the exhaust vent. The combustion air for top vent fireplaces is drawn from inside the home while the chimney vents the exhaust gas. The vent-free gas fireplace model uses no exhaust vent. This style includes an oxygen-depletion sensor that turns off the gas if it senses a dangerous lack of oxygen inside the house. While fireplace manufacturers claim that vent-free fireplaces burn clean, are energy-efficient and dont threaten indoor air quality, be aware that a number of states do not permit the installation of vent-free fireplaces. In the New England states of New Hampshire, Massachusetts, Vermont, Maine and Connecticut installation of vent-free gas fireplaces is permitted. Massachusetts has in the past not authorized the installation of vent free gas fireplaces for safety reasons.
An alternative to using a fireplace brush to get the rest of the ash out would be to use a vacuum. Make sure you use a vacuum that has a good filter on it, as ash has very tiny particles. Ash vacuums are specially designed with extra fine filters, so this would be a great option. It is not as messy as sweeping up all that ash, either! Another advantage to using ash vacuums is that you do not have to wait until your ashes and embers are completely cooled before vacuuming them up. Make sure you carefully read all labels and instructions on your specific ash vacuum. If you really want to do a deep cleaning, you can use a damp rag and wipe down the walls and floor of your firebox. This is completely optional and only for those who like that "white glove" test.
Gas fireplace inserts utilize natural gas or liquid propane as the fuel source and consist of a gas log set installed into a steel or cast iron stove and are usually sealed on the front with glass. Most gas inserts have fans or blowers that automatically circulate the heat. Gas inserts are available with remote controls, wall switches or wall-mounted thermostats. Wood-burning fireplace inserts use firewood as the fuel source. Wood inserts come with fans or blowers that automatically circulate the heat. Wood burning inserts would typically include an operable glass door in the front to allow for loading of firewood and flame viewing. Wood inserts vary in size of flame viewing area (the bigger the better) and maximum log length that can be inserted into the stove for burning.
The next step is to clean those well-used fireplace tools and fireplace grate. Black soot and resin can easily build up on your tools and can make them unsightly and grungy-looking. Here are a few simple steps to help bring back their original luster and shine. Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface.