Henriette Firepit February 27th, 2018 - 11:20:01
A firepit can be a beautiful addition to any yard. There are many different types of firepits available that are made of many different materials. One type of firepit that you will definitely want to consider is a copper firepit. Copper is a very attractive metal, but it is practical as well. Copper holds heat very well, it is an excellent conductor, meaning that you can use less wood. Another thing to keep in mind with copper is that it is a very durable metal. While some metals will corrode or rust, copper can withstand the elements. Copper firepits are practical as well as beautiful.
Firepit Tools: These tools are mainly used to tend the fires. You can buy a set or can just order fire poker and a pair of tongs, used for tending the fire and to move the logs, if they have been used to light the fire. Outdoor Firepit Screens: These screens are wire mesh devices attached to the outer edge of the outdoor firepit. The mesh is used to prevent fire and ashes from spilling out of the pit. There are various designs that you can get with the meshes. These meshes can be used in different ways when the pit is turned into an oven. You can feel the heat while keeping safe.
Its a bit tricky to get the heavy slabs in an exact circle with a consistent height but its best to prop them up and backfill with the gravel so that each stone is buried 150mm leaving a 450mm deep pit. The top of the granite should be 200mm above the surrounding ground level to allow for the concrete slab and paving. You could cut each stone lengthwise along one edge to make them fit flush with each other but it isnt necessary. The bottom of the pit was then paved to make shovelling out the ashes easier.
Seat distance from the firepit is critical. Too close and the fire will be too hot; too far away and the heat wont reach you. You can vary the distance with each seat but we found that for a pit 800mm in diameter the seats should be about 1m away from the pit. This allows people to walk in front of each other around the fire. Once the rock seats are in place the next job was to pour concrete around the pit and around the bottom of the seats so that the outside line of concrete joins all the stones about halfway. The back of the rocks protrudes out into what will become turf.