Henriette Firepit February 27th, 2018 - 11:18:39
For smaller groups and personal settings, you can opt for tabletop fire bowls. These surpass the triviality of the candle and add a completely new dimension to your table settings. Large fire bowls create spectacular effects around water displays and on lakeside gathering areas. The reflection of flames against water and fountains, inspire imagination, and feelings of well being. No matter what the application, the variety of firepits available for commercial and group settings is amazing, and guarantees that youll find one, or several, that will work for you. They will keep people talking about your place, and those same people will return with friends and family.
Another thing that you will want to consider after you have bought your new copper firepit is a grill or a grate. Check your instructions before purchasing a grate, if your firepit wasnt made for cooking then you wont want to buy a grate. It doesnt make any sense to take chance with something like fire. If your firepit is made for grilling, your instruction manual will tell you the right size grate for your particular model. There are a couple of other things that you might want to consider buying to also go with your copper firepit. If you bought a set it should come with tools for the fire, but if it didnt you will probably want to purchase tools. You will want something that you can use in the fire if you need to stir the wood. Another nice accessory is a cover. Copper can withstand the elements, but wet ashes can be very messy and a cover can save you that hassle. Finally, some people like to have a rug to place their new firepit on. If you decide that you want to use a rug, make sure it is fire resistant. You dont want to take any chances.
Seat distance from the firepit is critical. Too close and the fire will be too hot; too far away and the heat wont reach you. You can vary the distance with each seat but we found that for a pit 800mm in diameter the seats should be about 1m away from the pit. This allows people to walk in front of each other around the fire. Once the rock seats are in place the next job was to pour concrete around the pit and around the bottom of the seats so that the outside line of concrete joins all the stones about halfway. The back of the rocks protrudes out into what will become turf.
The reinforced concrete was poured to a depth of 100mm, allowing the firepit lining stones to protrude 100mm above it, with a slope of 1:100 away from the pit. Letting the concrete cure for a week, we then laid out random limestone pieces to gauge the best arrangement. Random stone comes in varying thicknesses and sizes and takes a great deal of patience to lay properly. You can simply start laying and choose matching pieces, filling in the many small gaps with small pieces but we prefer to shape the stones so that gaps are consistent and the small pieces are minimal. Once the stone was shaped and mortared down the gaps were grouted with mortar, coloured to match the stone. The final thing was sealing the limestone with a good quality stone sealant. And there is your party feature! When you light a fire and let it burn for a few hours the limestone patio begins to heat up and radiate to the surrounding seats making a very cosy spot on a cool autumn evening.