Henriette Firepit February 27th, 2018 - 11:16:21
Regardless of the type of firepit used, safety precautions are important. History shows that at one time a fire watcher was chosen to prevent the fire from going out or from spreading. In modern times it is also necessary to be vigilant. Keep the firepit away from dry leaves or other burnable items. Make sure someone is always in attendance, and observe local no burn days. Do not allow the smoke to irritate the neighbors or cause air pollution. The blessing of free standing firepits is that they can be moved to the most convenient location. Do not use them on a windy day, and keep children away from them. Be sure to cover them with their screen to prevent sparks. You can also purchase covers for them to use in inclement weather or for storage. Dont burn trash or scrap lumber in a firepit; use only wood or compressed logs. Dont overload the firepit. Keep a fire extinguisher or a hose close by. Due to the increase demand for firepits, they are becoming a "must have" for outdoor fun. You and your guests will enjoy sitting around a firepit on many summer or fall evenings.
Firepit Tools: These tools are mainly used to tend the fires. You can buy a set or can just order fire poker and a pair of tongs, used for tending the fire and to move the logs, if they have been used to light the fire. Outdoor Firepit Screens: These screens are wire mesh devices attached to the outer edge of the outdoor firepit. The mesh is used to prevent fire and ashes from spilling out of the pit. There are various designs that you can get with the meshes. These meshes can be used in different ways when the pit is turned into an oven. You can feel the heat while keeping safe.
Once youve dug the hole you have 2 options, staying natural or a liner. Both have advantages and disadvantages. Leaving the pit bare saves you time and money. Once youre done digging all that you need to do is edge the hole. The biggest disadvantage to this method is that any rainstorm can wash out the sides of the pit and make it unstable. If youve decided to line the firepit then you have a few options. The cheapest method is to pour gravel into the hole and press it into the sides. Its a cheap affordable way to ensure proper drainage. The most expensive option is to brick and mortar the entire hole, while leaving drain holes in the bottom. Its an attractive solution, and youll never have to worry about one of the sides washing out.
Its a bit tricky to get the heavy slabs in an exact circle with a consistent height but its best to prop them up and backfill with the gravel so that each stone is buried 150mm leaving a 450mm deep pit. The top of the granite should be 200mm above the surrounding ground level to allow for the concrete slab and paving. You could cut each stone lengthwise along one edge to make them fit flush with each other but it isnt necessary. The bottom of the pit was then paved to make shovelling out the ashes easier.