Henriette Firepit February 27th, 2018 - 11:15:21
Procedure: First, we excavated a pit approximately 1metre (3 feet) in diameter and 800mm deep. The ground we were working on was very rocky so we used a backhoe and it was difficult to carve a smooth hole as you can see by the photos. Next we dug a drainage channel from the bottom of the hole to a lower point beyond the extent of the fire area. This was essential in this circumstance due to the heavy rainfall and the heavy soil. If your soil is porous it may not be necessary to provide drainage to the pit. In the channel we laid the plastic drainage pipe and covered it with gravel. Because we wanted to line the pit with the 600mm granite slabs we placed extra gravel in the bottom of the pit to set the stones on upright in a circle.
Imagine further the romantic ambiance with the special person you love sitting close the dancing flames and watching them together from a garden bench or swing. Outdoor firepits are a very stylish and convenient way to create such an atmosphere for such an experience that can be repeated as many times as weather will permit. If you enjoy camping and roasting hotdogs and marshmallows over the camp fire, this doesnt have to replace such trips, but allows you to have many of the benefits you love from camping conveniently right in your own back yard with your outdoor firepit.
Are you interested in an outdoor firepit? An outdoor fireplace can be an amazing attraction on your patio, or use anywhere in the yawn. Use it like a campfire in your own backyard! Most firepits can easily be transported anywhere, so you can take on a camping trip or to a friends place if you desire. An outdoor fireplace is like sitting around the campfire, everyone will enjoy gathering around the fire and some will sure want to roast marsh mellows. There are so many types of firepits on the market today. Take the time to shop around, you may find more and more, and may have a hard time deciding which type to choose. Some common styles are bowl, square, and rounded cylinder.
The reinforced concrete was poured to a depth of 100mm, allowing the firepit lining stones to protrude 100mm above it, with a slope of 1:100 away from the pit. Letting the concrete cure for a week, we then laid out random limestone pieces to gauge the best arrangement. Random stone comes in varying thicknesses and sizes and takes a great deal of patience to lay properly. You can simply start laying and choose matching pieces, filling in the many small gaps with small pieces but we prefer to shape the stones so that gaps are consistent and the small pieces are minimal. Once the stone was shaped and mortared down the gaps were grouted with mortar, coloured to match the stone. The final thing was sealing the limestone with a good quality stone sealant. And there is your party feature! When you light a fire and let it burn for a few hours the limestone patio begins to heat up and radiate to the surrounding seats making a very cosy spot on a cool autumn evening.