Home / Firepit / fire pit ideas outdoor living pictures design / Fire Pit Ideas Pinterest Welding Fire Pit Plans Paver Patio With Fire Pit Plan In Ground Fire Pit Ideas How To Build A Fire Pit With Rocks
Henriette Firepit February 27th, 2018 - 11:14:44
Procedure: First, we excavated a pit approximately 1metre (3 feet) in diameter and 800mm deep. The ground we were working on was very rocky so we used a backhoe and it was difficult to carve a smooth hole as you can see by the photos. Next we dug a drainage channel from the bottom of the hole to a lower point beyond the extent of the fire area. This was essential in this circumstance due to the heavy rainfall and the heavy soil. If your soil is porous it may not be necessary to provide drainage to the pit. In the channel we laid the plastic drainage pipe and covered it with gravel. Because we wanted to line the pit with the 600mm granite slabs we placed extra gravel in the bottom of the pit to set the stones on upright in a circle.
When you buy a new copper firepit there are some safety issues that you will want to follow. One of the most important things to keep in mind is the weather. If your area has issued a fire warning of any type you wont want to start a fire outdoors. In dry areas it is better to be safe than to be sorry. If there is no fire warning remember also that you need to keep your fire under control. Make sure that your fire doesnt get too big, and keep a screen on the firepit so that there wont be any burning embers or ashes flying away from the fire.
Your next step is to start digging! Since youve already decided on the size of your firepit, all you have to do is dig an appropriately sized hole. Next, use bricks of the same height and place them at the surface level of the pit. From there, begin creating simple stacked rows, making sure to offset the vertical joints of each brick. When your pit has reached your desired and pre-planned height, youre ready to move on to the next step. Support the bricks you have laid by adding firmly packed soil around the area. You can also use gravel for the floor of the pit, smoothing as you add it in. Your final step is to add in top caps to the walls.
There are other safety issues that you also need to consider when lighting a fire in a copper firepit. Never, ever leave a fire unattended, even for just a moment. Also make sure that any children that are with you keep a safe distance from the fire. Do not allow children to put anything into a burning fire, even if they claim that they know what they are doing. Dont allow children to stir the fire or to add wood or charcoal. Also keep a bucket of water handy in case you need to put the fire out quickly. With a few precautions, you can happily enjoy your new copper firepit for years to come. A little bit of common sense goes a long way. Remember that if something seems like a bad idea, it probably is. Fire can be dangerous, but it doesnt have to be. Use care and make sure that you dont get too close. Follow all directions that came with your firepit. Youll be glad that you did.