Henriette Firepit February 27th, 2018 - 13:39:31
Once the stone lining was completed we used an excavator to place the large stone seats. Depending on the size of the stones they may have to be dug into the ground or set higher on gravel to give them an approximately consistent height. Bearing in mind that a comfortable adult seat height should be 300 - 400mm the stones need to conform to this measurement. By the time the concrete is poured and the paving laid the finished ground height will be 150mm higher than existing ground level, meaning that the rocks should stand 450 - 550mm above the ground.
Another thing that you will want to consider after you have bought your new copper firepit is a grill or a grate. Check your instructions before purchasing a grate, if your firepit wasnt made for cooking then you wont want to buy a grate. It doesnt make any sense to take chance with something like fire. If your firepit is made for grilling, your instruction manual will tell you the right size grate for your particular model. There are a couple of other things that you might want to consider buying to also go with your copper firepit. If you bought a set it should come with tools for the fire, but if it didnt you will probably want to purchase tools. You will want something that you can use in the fire if you need to stir the wood. Another nice accessory is a cover. Copper can withstand the elements, but wet ashes can be very messy and a cover can save you that hassle. Finally, some people like to have a rug to place their new firepit on. If you decide that you want to use a rug, make sure it is fire resistant. You dont want to take any chances.
As cooler weather approaches more people look towards firepit use to create both warmth and ambiance outdoors. With a growing number of consumers purchasing gas fueled fire pits, the no brainer, quick fire-lighting convenience with no messy ashes, can leave people with a false sense of security. However, dangers do exist. If you own a gas firepit or, are thinking of purchasing one, here are a few safety tips. And once you are done reading those. Take a look at cleaning and maintenance.
You will want to use an appropriate adhesive material, such as mortar, to keep the caps firmly in place. Be sure to apply the caps only to dry surfaces and to keep them level during the process. Believe it or not, once youve done this, youre ready to try out your new firepit! Make sure to take proper care of your firepit so that you can enjoy it for many years to come. Always clean the ashes from your pit one day after use. If you have decided to paint your pit (using fire resistant paint, of course), it may need touch-ups from time to time to continue looking its best. Make sure that water is never used to put out fires, as this can cause the firepit to break down faster. Youll also want to invest in a good firepit cover for when the pit is not in use.