Henriette Fireplace December 10th, 2017 - 12:02:23
Once you have finished cleaning your chimney, the next step in cleaning your fireplace to prepare it for the coming warmer months, is to clean out the firebox. You will need to give your firebox walls a good brushing with a nice stiff brush. Knock down all the loose soot and ash that has gotten stuck to the brick walls and flue. Remove your fireplace grate and set it to the side on a newspaper. Keep it from touching your finished flooring, as it will leave a nice sooty footprint. You will clean this and your other fireplace tools in the next step. Using your fireplace shovel, you will need to scoop out as much of the completely cooled ash and the chunks of unburned wood as you can. Using your fireplace brush, sweep the remainder of the ash onto your shovel and into an ash bucket.
The flat screen fire-screen can be made of one, two, three or four panels. It might fold up neatly when not in use or may be so aesthetically pleasing that hiding it is undesirable. While a fire-screen serves a clearly defined use-value when used in conjunction with a wood-burning fireplace most homeowners who own gas log fireplaces also use fire-screens. The fire-screen serves as an obstruction to children and pets but is often purchased for its decorative qualities. Fitting a fireplace screen such as the flat panel variety may be relatively easy, as they are not designed to fit flush to the fireplace and can easily over-lap the fireplace width and still look attractive and serve the function of containing sparks on one side and fingers on the other. Not all older brick or cement fireplaces are of a consistent size because most of these fireplaces are built on site as custom designs. While newer fireplace designs are fitted around a standardized firebox, older fireplaces were built custom on site. Newer fireplaces that are customized inside the home use a steel firebox with insulation, heat shields and fire brick already installed. The fire box can be built into a mantle or into a wall of the home with little to no safety features necessary for full functionality.
Maintenance and Care Most of the time electric fireplaces are not as demanding as the traditional ones when it comes to maintenance. In fact, most of the time electric fireplaces only demand maintenance when it comes to keeping the screen at least dust free and ensuring the electricity outlet is functioning as it should be. Therefore, most of the time fireplaces demand a lot of caution when it comes to ensuring that the power supply to the fireplace does not lead to blowing up of a fuse. Actually, to be on the safe side it is highly advisable to consult your electrician on the power supply to your fireplace and let him or her ensure that the wiring of the fireplace is correct. This also means keeping all the flammable objects far from the fireplace and make sure anyone living under the same roof understands this caution.
The Purpose of the Fireplace There are different reasons as to why you would need an electric fireplace and one of them can be to warm a living room or a particular room in the house. Therefore, chances are that you could end up having to choose between an electric heater and an electric fireplace. The truth is that both are quite demanding when it comes to electricity consumption and most the time, you cannot rely on an electric fireplace as a main source of heat. In fact, there are no assurances that the fireplace will increase the value of any home. In other words, electric fireplaces can have the best aesthetic value to any home whereby you can still use it to mimic the traditional fireplace without having it warm up the house. On the other hand, you also need to weigh the effectiveness of having such equipment in your home.