Home / Fireplace / fantastic american heritage fireplace pictures design / Fireplace Store Waukesha Cozy Restaurant Chicago Fireplace Repair Milwaukee,,american Heritage Fireplace Coupon American Fireplace Waukesha Gas Fireplace Repair Chicago
Henriette Fireplace February 11th, 2018 - 10:09:24
This is not the case, heat from your fireplace will radiate out through the glass even if the glass-doors are closed, so a good way to use your glass-doors is to burn the fireplace with the glass-doors open and the safety screen closed. In this way you have all the beauty and ambience of your fire before you. If your fireplace is equipped with outside air or make up air you can also burn the fireplace with the glass doors shut and the safety screen open, in this mode you will be able to see your beautiful fire and feel the radiant heat, but not be losing any of the air in the room up the chimney. Make up air or outside air can be installed on most fireplaces if you dont have it in your fireplace now. These two things will also overcome the reasons that some fireplaces smoke, and also why your fireplace has a drafty smokey smell to it when it is not being used. Just for those two reasons every fireplace should have glass-doors installed on them.
The best reason I have saved for last and that is, your fireplace is costing you heat loss all day and night even when your not using it. The reason is that your damper in your fireplace is not airtight they are made that way to maintain a certain amount of clearance even when they are closed. So If you have a fireplace that does not have a glass-door you are wasting energy, up and out the chimney. In this article its easy to see how you can get more heat out of your fireplace with just a few small changes, that will let you burn outside air instead of the air that you already paid to heat, and by installing glass-doors to stop heat loss.
If you decide that sitting next to the fireplace is the way to go, you will need to make sure you have enough chimney rods to span the entire length of your chimney. As you are sitting next to your fireplace, push your brush up through the flue. Continue to add more brush rods as needed until the brush is at the top of the chimney. As you pull the brush back down, you will need to make a back and forth motion to really scrub the creosote off the walls of the chimney. Be sure to shield your eyes, as some of this loosened creosote may fall into the firebox.
The first thing that you would want to know about your fireplace is it in good working order? As a masonry contractor in the Seattle area we see quite a few chimney every year that are unsafe to burn and need to be repaired. Some of the things that you would want to look for would be, if the fireplace needs repair or has loose brick, smoking problems, water damage, or damper problems. One of the best ways to see if your fireplace is ready to burn is to ask for an inspection from a masonry contractor in your area. Now is the time to start that fire, and as we said above we want the fireplace to burn in an efficient way.