Henriette Fireplace February 11th, 2018 - 10:07:59
An alternative to using a fireplace brush to get the rest of the ash out would be to use a vacuum. Make sure you use a vacuum that has a good filter on it, as ash has very tiny particles. Ash vacuums are specially designed with extra fine filters, so this would be a great option. It is not as messy as sweeping up all that ash, either! Another advantage to using ash vacuums is that you do not have to wait until your ashes and embers are completely cooled before vacuuming them up. Make sure you carefully read all labels and instructions on your specific ash vacuum. If you really want to do a deep cleaning, you can use a damp rag and wipe down the walls and floor of your firebox. This is completely optional and only for those who like that "white glove" test.
A fireplace glass door is installed on a fireplace to keep the room warm longer when the flames die down. Whether a wood burning fireplace or a gas burning fireplace, heat radiated into the room escapes through the chimney. One does not notice this while the fire is burning brightly, because of the heat from the flames that radiates into the room. However, when the fire starts to die down, the hearth becomes cold quickly as the heat escapes through the fireplace opening. To stop this from happening, a fireplace glass doors blocks the opening, keeping the warm air from leaving the room. Aside from keeping the warm air from escaping, the doors act to keep the hearth clean just as a fireplace screen used to do in the olden days. With the doors closed, ashes and embers dont scatter about the room, keeping the carpet or rug clean and scorch-free. The doors also have built in devices that divert air towards the bottom of the fireplace. These vents make the fire burn brighter and easier to light.
The first thing that you would want to know about your fireplace is it in good working order? As a masonry contractor in the Seattle area we see quite a few chimney every year that are unsafe to burn and need to be repaired. Some of the things that you would want to look for would be, if the fireplace needs repair or has loose brick, smoking problems, water damage, or damper problems. One of the best ways to see if your fireplace is ready to burn is to ask for an inspection from a masonry contractor in your area. Now is the time to start that fire, and as we said above we want the fireplace to burn in an efficient way.
Pellet fireplace inserts use wood pellets or other types of pellets (corn based, soy based, etc.) as the fuel source. Pellet fireplace inserts come with fans or blowers that automatically circulate the heat. Pellet-Burning Hearth Appliances Pellet-burning hearth appliances are simpler to operate and more convenient than other wood-burning appliances. In fact, they are almost as easy to use as gas, oil or electric heaters. Pellet stoves and pellet inserts burn wood pellets or compressed wood. Pellet-burning hearth appliances are loaded with pellets through a hopper and the rate of burn is controlled by an electronic circuit board that is typically controlled by burn settings or a thermostat. Most pellet appliances have at least two burn settings and some new models use thermostats to control the fire.