Madeleine Aguilar Firepit February 19th, 2018 - 09:52:58
Procedure: First, we excavated a pit approximately 1metre (3 feet) in diameter and 800mm deep. The ground we were working on was very rocky so we used a backhoe and it was difficult to carve a smooth hole as you can see by the photos. Next we dug a drainage channel from the bottom of the hole to a lower point beyond the extent of the fire area. This was essential in this circumstance due to the heavy rainfall and the heavy soil. If your soil is porous it may not be necessary to provide drainage to the pit. In the channel we laid the plastic drainage pipe and covered it with gravel. Because we wanted to line the pit with the 600mm granite slabs we placed extra gravel in the bottom of the pit to set the stones on upright in a circle.
When you buy a new copper firepit there are some safety issues that you will want to follow. One of the most important things to keep in mind is the weather. If your area has issued a fire warning of any type you wont want to start a fire outdoors. In dry areas it is better to be safe than to be sorry. If there is no fire warning remember also that you need to keep your fire under control. Make sure that your fire doesnt get too big, and keep a screen on the firepit so that there wont be any burning embers or ashes flying away from the fire.
Buying a new copper firepit can be a great addition to any deck or backyard. Copper is a beautiful metal, and its long lasting and durable. Copper wont rust or corrode, unlike other metals, so your firepit will last for years and still look as good as the day you bought it. Another nice thing about copper is that it also conducts heat very well, so you will have a warm fire while burning less wood. Purchasing a firepit that is made of copper can be a very smart thing to do. Once you bring home your new copper firepit, youre going to want to think about accessories. One thing that is a very good idea is to buy a screen to place on top. This will help prevent hot ashes and burning embers from leaving the pit. Some firepits come with a screen, others may not so if yours doesnt have one you will want to think about purchasing one. You might also want to consider purchasing a lid to help put the fire out quicker at the end of the night.
Once the stone lining was completed we used an excavator to place the large stone seats. Depending on the size of the stones they may have to be dug into the ground or set higher on gravel to give them an approximately consistent height. Bearing in mind that a comfortable adult seat height should be 300 - 400mm the stones need to conform to this measurement. By the time the concrete is poured and the paving laid the finished ground height will be 150mm higher than existing ground level, meaning that the rocks should stand 450 - 550mm above the ground.