Henriette Fireplace February 09th, 2018 - 12:12:47
A fireplace glass door is installed on a fireplace to keep the room warm longer when the flames die down. Whether a wood burning fireplace or a gas burning fireplace, heat radiated into the room escapes through the chimney. One does not notice this while the fire is burning brightly, because of the heat from the flames that radiates into the room. However, when the fire starts to die down, the hearth becomes cold quickly as the heat escapes through the fireplace opening. To stop this from happening, a fireplace glass doors blocks the opening, keeping the warm air from leaving the room. Aside from keeping the warm air from escaping, the doors act to keep the hearth clean just as a fireplace screen used to do in the olden days. With the doors closed, ashes and embers dont scatter about the room, keeping the carpet or rug clean and scorch-free. The doors also have built in devices that divert air towards the bottom of the fireplace. These vents make the fire burn brighter and easier to light.
The flat screen fire-screen can be made of one, two, three or four panels. It might fold up neatly when not in use or may be so aesthetically pleasing that hiding it is undesirable. While a fire-screen serves a clearly defined use-value when used in conjunction with a wood-burning fireplace most homeowners who own gas log fireplaces also use fire-screens. The fire-screen serves as an obstruction to children and pets but is often purchased for its decorative qualities. Fitting a fireplace screen such as the flat panel variety may be relatively easy, as they are not designed to fit flush to the fireplace and can easily over-lap the fireplace width and still look attractive and serve the function of containing sparks on one side and fingers on the other. Not all older brick or cement fireplaces are of a consistent size because most of these fireplaces are built on site as custom designs. While newer fireplace designs are fitted around a standardized firebox, older fireplaces were built custom on site. Newer fireplaces that are customized inside the home use a steel firebox with insulation, heat shields and fire brick already installed. The fire box can be built into a mantle or into a wall of the home with little to no safety features necessary for full functionality.
Pellet fireplace inserts use wood pellets or other types of pellets (corn based, soy based, etc.) as the fuel source. Pellet fireplace inserts come with fans or blowers that automatically circulate the heat. Pellet-Burning Hearth Appliances Pellet-burning hearth appliances are simpler to operate and more convenient than other wood-burning appliances. In fact, they are almost as easy to use as gas, oil or electric heaters. Pellet stoves and pellet inserts burn wood pellets or compressed wood. Pellet-burning hearth appliances are loaded with pellets through a hopper and the rate of burn is controlled by an electronic circuit board that is typically controlled by burn settings or a thermostat. Most pellet appliances have at least two burn settings and some new models use thermostats to control the fire.
5. Put Your Fireplace Candelabra on Your Mantel - For those of us who have gas or electric fireplaces, and do not wish to remove the fake logs during the warm season, consider placing a candelabrum or two on your mantel. This is actually a very classic way of decorating your fireplace. Use fireplace candelabra that are made for smaller fireplaces or zero clearance fireplaces. 6. Put Your Fireplace Candelabra on Your Hearth - If you do not have a mantel, you can place your fireplace candelabra on your hearth just as easily. Be sure to add a little greenery in the spring, maybe a sting of fall leaves in the autumn and some pine needles and cones in the winter for an added special touch.