Henriette Fireplace February 09th, 2018 - 12:12:35
Pellet fireplace inserts use wood pellets or other types of pellets (corn based, soy based, etc.) as the fuel source. Pellet fireplace inserts come with fans or blowers that automatically circulate the heat. Pellet-Burning Hearth Appliances Pellet-burning hearth appliances are simpler to operate and more convenient than other wood-burning appliances. In fact, they are almost as easy to use as gas, oil or electric heaters. Pellet stoves and pellet inserts burn wood pellets or compressed wood. Pellet-burning hearth appliances are loaded with pellets through a hopper and the rate of burn is controlled by an electronic circuit board that is typically controlled by burn settings or a thermostat. Most pellet appliances have at least two burn settings and some new models use thermostats to control the fire.
Cast Iron Fireplaces Those who have homes with very little room for a fireplace will like the cast iron fireplaces. This type can be put up in a home using just a cement slab, the size of the fireplace and a fire proof stone wall at the back. It will require venting into a chimney, or outside, according to your municipal codes. Cast iron fireplaces and stoves are perfect for small areas. Cast iron fireplaces create a smokeless fuel fire so they are appropriate for interiors. Traditional Fireplaces The most recognizable type of fireplace is the typical "wall-mounted" design found in living rooms, dens, and even bedrooms. It may be consisted of brick, cement, stone, ceramic, or some mixture of these materials. The opening will typically be covered with a metal or glass screen of some type. Fireplaces of this kind often are surrounded by an exterior mantle, which can be made of wood, stone, brick, marble, metal, or some other material. Mantle styles can vary from unadorned to stylish to ornate to fanciful. Due to their importance, they often set the decorative tone for the whole room. Mostly they use wood for fuel, but some can also burn peat, coal, and other materials. Fireplaces of this type are not for the most part energy-efficient.
The best reason I have saved for last and that is, your fireplace is costing you heat loss all day and night even when your not using it. The reason is that your damper in your fireplace is not airtight they are made that way to maintain a certain amount of clearance even when they are closed. So If you have a fireplace that does not have a glass-door you are wasting energy, up and out the chimney. In this article its easy to see how you can get more heat out of your fireplace with just a few small changes, that will let you burn outside air instead of the air that you already paid to heat, and by installing glass-doors to stop heat loss.
5. Put Your Fireplace Candelabra on Your Mantel - For those of us who have gas or electric fireplaces, and do not wish to remove the fake logs during the warm season, consider placing a candelabrum or two on your mantel. This is actually a very classic way of decorating your fireplace. Use fireplace candelabra that are made for smaller fireplaces or zero clearance fireplaces. 6. Put Your Fireplace Candelabra on Your Hearth - If you do not have a mantel, you can place your fireplace candelabra on your hearth just as easily. Be sure to add a little greenery in the spring, maybe a sting of fall leaves in the autumn and some pine needles and cones in the winter for an added special touch.