Henriette Fireplace February 09th, 2018 - 12:12:29
Once you have finished cleaning your chimney, the next step in cleaning your fireplace to prepare it for the coming warmer months, is to clean out the firebox. You will need to give your firebox walls a good brushing with a nice stiff brush. Knock down all the loose soot and ash that has gotten stuck to the brick walls and flue. Remove your fireplace grate and set it to the side on a newspaper. Keep it from touching your finished flooring, as it will leave a nice sooty footprint. You will clean this and your other fireplace tools in the next step. Using your fireplace shovel, you will need to scoop out as much of the completely cooled ash and the chunks of unburned wood as you can. Using your fireplace brush, sweep the remainder of the ash onto your shovel and into an ash bucket.
There are three different styles of gas fireplaces: the direct vent model, the top vent design, and the vent-free model. The direct vent gas fireplace uses two vent pipes that lead directly to the outside. One pipe uses combustion air from the outside while the other vents the exhaust gas. The top vent gas fireplace design can be installed into existing fireplaces and uses the metal or brick chimney as the exhaust vent. The combustion air for top vent fireplaces is drawn from inside the home while the chimney vents the exhaust gas. The vent-free gas fireplace model uses no exhaust vent. This style includes an oxygen-depletion sensor that turns off the gas if it senses a dangerous lack of oxygen inside the house. While fireplace manufacturers claim that vent-free fireplaces burn clean, are energy-efficient and dont threaten indoor air quality, be aware that a number of states do not permit the installation of vent-free fireplaces. In the New England states of New Hampshire, Massachusetts, Vermont, Maine and Connecticut installation of vent-free gas fireplaces is permitted. Massachusetts has in the past not authorized the installation of vent free gas fireplaces for safety reasons.
Fireplace screens can serve as spark arrestors for the wood burning fireplace and as decorative items or they can help protect a hearth floor area from rolling logs moving around as flames burn off a wood stack in the case of sturdier types of screens. Most screens are made of metal such as brass or more commonly wrought iron or steel. Since fireplace screens are subjected to the full heat of the fireplace they must be made of durable materials. Perhaps the most common type of fireplace screen is the mesh spark arrestor made of finely wrought interlinked chains, which are hung from a rod suspended from the lintel inside the fireplace opening. The screens can be drawn shut like a curtain when needed or opened when the fireplace is not in use.
Maintenance and Care Most of the time electric fireplaces are not as demanding as the traditional ones when it comes to maintenance. In fact, most of the time electric fireplaces only demand maintenance when it comes to keeping the screen at least dust free and ensuring the electricity outlet is functioning as it should be. Therefore, most of the time fireplaces demand a lot of caution when it comes to ensuring that the power supply to the fireplace does not lead to blowing up of a fuse. Actually, to be on the safe side it is highly advisable to consult your electrician on the power supply to your fireplace and let him or her ensure that the wiring of the fireplace is correct. This also means keeping all the flammable objects far from the fireplace and make sure anyone living under the same roof understands this caution.