Henriette Fireplace February 09th, 2018 - 12:12:17
Once you have removed all the dirt and soot, you may decide to add an extra sparkle to your freshly cleaned fireplace tools. You can do this by polishing with a brass polisher. Follow all label instructions and warnings when applying this to your tools. You can now enjoy your clean fireplace for the rest of the season, without worrying about flying dust or ash or about a dangerous creosote fire breaking out in the fireplace. Do not forget to close the flue to prevent any drafts and to keep your firebox free from debris. Decorating your fireplace is a pleasure once it is all clean. The fun part is deciding what you will use. How about creating a fresh look for your fireplace by getting a new fireplace screen? There are so many options out there as far as design and style. Some of my favorites are single panel fireplace screens. With a single panel fireplace screen, you do not need to have much room on your hearth. Because it is a flat fireplace screen, it can sit right up against the firebox and takes up very little precious space. As for the design, how about adding the fresh look of spring with a leaf fireplace screen? If you really love that look, you can even get a matching leaf fireplace tool set and log holder to go with it!
There are actually several good ways to clean out a chimney. One is to purchase a chimney brush that matches your size and type of chimney. These brushes are specially designed for cleaning out chimneys, but you need to make sure you have the right size for your specific chimney. Also, if you have a brick and mortar chimney you should use a wire brush, whereas if your chimney is prefab, you should use a brush with poly bristles. The shape of your chimney is also important in considering which brush to buy. Some chimneys are square or rectangle, while others are round. Once you have determined which brush is best for your chimney, you need to decide whether you are more comfortable climbing up on top of your roof to clean or sitting next to your fireplace.
1. Use Fabric to Decorate Your Fireplace Candelabra - Having fireplace candelabra lit in your fireplace can create a warm glow and an inviting flicker, but you will not always have your candles lit. So during the times when you do not, you can add a little color using fabric. Find a color and design that matches the rest of your home decor, and purchase a small amount; about a yard should be plenty. Simply wrap the fabric around and in and out of the spindles of the candelabrum. Let some of the fabric bunch and billow out at random intervals. Tuck in the ends and edges and you quickly have a beautiful centerpiece. Replace the candles, but remember to remove the fabric before lighting them.
There are three different styles of gas fireplaces: the direct vent model, the top vent design, and the vent-free model. The direct vent gas fireplace uses two vent pipes that lead directly to the outside. One pipe uses combustion air from the outside while the other vents the exhaust gas. The top vent gas fireplace design can be installed into existing fireplaces and uses the metal or brick chimney as the exhaust vent. The combustion air for top vent fireplaces is drawn from inside the home while the chimney vents the exhaust gas. The vent-free gas fireplace model uses no exhaust vent. This style includes an oxygen-depletion sensor that turns off the gas if it senses a dangerous lack of oxygen inside the house. While fireplace manufacturers claim that vent-free fireplaces burn clean, are energy-efficient and dont threaten indoor air quality, be aware that a number of states do not permit the installation of vent-free fireplaces. In the New England states of New Hampshire, Massachusetts, Vermont, Maine and Connecticut installation of vent-free gas fireplaces is permitted. Massachusetts has in the past not authorized the installation of vent free gas fireplaces for safety reasons.