Henriette Fireplace February 09th, 2018 - 12:09:17
The Purpose of the Fireplace There are different reasons as to why you would need an electric fireplace and one of them can be to warm a living room or a particular room in the house. Therefore, chances are that you could end up having to choose between an electric heater and an electric fireplace. The truth is that both are quite demanding when it comes to electricity consumption and most the time, you cannot rely on an electric fireplace as a main source of heat. In fact, there are no assurances that the fireplace will increase the value of any home. In other words, electric fireplaces can have the best aesthetic value to any home whereby you can still use it to mimic the traditional fireplace without having it warm up the house. On the other hand, you also need to weigh the effectiveness of having such equipment in your home.
An alternative to using a fireplace brush to get the rest of the ash out would be to use a vacuum. Make sure you use a vacuum that has a good filter on it, as ash has very tiny particles. Ash vacuums are specially designed with extra fine filters, so this would be a great option. It is not as messy as sweeping up all that ash, either! Another advantage to using ash vacuums is that you do not have to wait until your ashes and embers are completely cooled before vacuuming them up. Make sure you carefully read all labels and instructions on your specific ash vacuum. If you really want to do a deep cleaning, you can use a damp rag and wipe down the walls and floor of your firebox. This is completely optional and only for those who like that "white glove" test.
While these screens will not stop a rolling log they will protect areas outside the hearth from flying sparks from popping wood sap. One of the greatest advantages to mesh screens is that they require no extra space or braces and do not extend past the flush face of the fireplace. Another very common type of fireplace screen is made of iron, brass or steel and mounts in front of or on the hearth free-standing in front of the firebox. These fireplace screens can be a simple flat screen, might be free standing on leg-brackets and could be the more common three-sided screen. Three-sided screens have a center section that spans the width of the fireplace. The two sides are hinged to turn at a thirty to forty-five degree angle thus holding the screen plum straight up. The fireplace screen can have fireplace tools, candles and all manner of artistic décor built into the design.
The next step is to clean those well-used fireplace tools and fireplace grate. Black soot and resin can easily build up on your tools and can make them unsightly and grungy-looking. Here are a few simple steps to help bring back their original luster and shine. Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface.