Home / Fireplace / convert fireplace to gas picture ideas / Convert Wood Cook Stove To Gas Swapping Gas Fire For Electric Removing Gas Fire And Replacing With Electric Adding A Fireplace To An Existing Home
Henriette Fireplace February 15th, 2018 - 10:16:42
While it is true that a fireplace insert is great for bringing life back to that old traditional or gas fireplace you have sitting dormant in the living room, a fireplace insert can do so much more for your home. If you have ever looked around your home and wondered how much it would cost to put a fireplace in a certain wall, room or area, you will be surprised when you hear the answer. While construction and labor costs for a traditional or gas fireplace can cost upwards of ten thousand dollars, you can actually have a fireplace built for merely hundreds if you use a fireplace insert and some materials from your local hardware store. Now, I cant deny that it is nice to have a wall mounted gas fireplace that lights with a simple remote. But, a wall mounted gel fireplace can be installed in merely hours for thousands of dollars less.
Pellet fireplace inserts use wood pellets or other types of pellets (corn based, soy based, etc.) as the fuel source. Pellet fireplace inserts come with fans or blowers that automatically circulate the heat. Pellet-Burning Hearth Appliances Pellet-burning hearth appliances are simpler to operate and more convenient than other wood-burning appliances. In fact, they are almost as easy to use as gas, oil or electric heaters. Pellet stoves and pellet inserts burn wood pellets or compressed wood. Pellet-burning hearth appliances are loaded with pellets through a hopper and the rate of burn is controlled by an electronic circuit board that is typically controlled by burn settings or a thermostat. Most pellet appliances have at least two burn settings and some new models use thermostats to control the fire.
Gas fireplace inserts utilize natural gas or liquid propane as the fuel source and consist of a gas log set installed into a steel or cast iron stove and are usually sealed on the front with glass. Most gas inserts have fans or blowers that automatically circulate the heat. Gas inserts are available with remote controls, wall switches or wall-mounted thermostats. Wood-burning fireplace inserts use firewood as the fuel source. Wood inserts come with fans or blowers that automatically circulate the heat. Wood burning inserts would typically include an operable glass door in the front to allow for loading of firewood and flame viewing. Wood inserts vary in size of flame viewing area (the bigger the better) and maximum log length that can be inserted into the stove for burning.
Once you have finished cleaning your chimney, the next step in cleaning your fireplace to prepare it for the coming warmer months, is to clean out the firebox. You will need to give your firebox walls a good brushing with a nice stiff brush. Knock down all the loose soot and ash that has gotten stuck to the brick walls and flue. Remove your fireplace grate and set it to the side on a newspaper. Keep it from touching your finished flooring, as it will leave a nice sooty footprint. You will clean this and your other fireplace tools in the next step. Using your fireplace shovel, you will need to scoop out as much of the completely cooled ash and the chunks of unburned wood as you can. Using your fireplace brush, sweep the remainder of the ash onto your shovel and into an ash bucket.