Henriette Fireplace February 17th, 2018 - 07:41:43
The next step is to clean those well-used fireplace tools and fireplace grate. Black soot and resin can easily build up on your tools and can make them unsightly and grungy-looking. Here are a few simple steps to help bring back their original luster and shine. Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface.
Cast Iron Fireplaces Those who have homes with very little room for a fireplace will like the cast iron fireplaces. This type can be put up in a home using just a cement slab, the size of the fireplace and a fire proof stone wall at the back. It will require venting into a chimney, or outside, according to your municipal codes. Cast iron fireplaces and stoves are perfect for small areas. Cast iron fireplaces create a smokeless fuel fire so they are appropriate for interiors. Traditional Fireplaces The most recognizable type of fireplace is the typical "wall-mounted" design found in living rooms, dens, and even bedrooms. It may be consisted of brick, cement, stone, ceramic, or some mixture of these materials. The opening will typically be covered with a metal or glass screen of some type. Fireplaces of this kind often are surrounded by an exterior mantle, which can be made of wood, stone, brick, marble, metal, or some other material. Mantle styles can vary from unadorned to stylish to ornate to fanciful. Due to their importance, they often set the decorative tone for the whole room. Mostly they use wood for fuel, but some can also burn peat, coal, and other materials. Fireplaces of this type are not for the most part energy-efficient.
1. Use Fabric to Decorate Your Fireplace Candelabra - Having fireplace candelabra lit in your fireplace can create a warm glow and an inviting flicker, but you will not always have your candles lit. So during the times when you do not, you can add a little color using fabric. Find a color and design that matches the rest of your home decor, and purchase a small amount; about a yard should be plenty. Simply wrap the fabric around and in and out of the spindles of the candelabrum. Let some of the fabric bunch and billow out at random intervals. Tuck in the ends and edges and you quickly have a beautiful centerpiece. Replace the candles, but remember to remove the fabric before lighting them.
This is not the case, heat from your fireplace will radiate out through the glass even if the glass-doors are closed, so a good way to use your glass-doors is to burn the fireplace with the glass-doors open and the safety screen closed. In this way you have all the beauty and ambience of your fire before you. If your fireplace is equipped with outside air or make up air you can also burn the fireplace with the glass doors shut and the safety screen open, in this mode you will be able to see your beautiful fire and feel the radiant heat, but not be losing any of the air in the room up the chimney. Make up air or outside air can be installed on most fireplaces if you dont have it in your fireplace now. These two things will also overcome the reasons that some fireplaces smoke, and also why your fireplace has a drafty smokey smell to it when it is not being used. Just for those two reasons every fireplace should have glass-doors installed on them.