Home / Fireplace / awful bronze fireplace screen image design / Fireplace Screens With Glass Doors Wood Burning Fireplace Glass Doors Cheap Fireplace Screens Fireplace Screens With Doors Fireplace Screens Cheap
Henriette Fireplace February 13th, 2018 - 10:44:48
Improve your fireplaces heat efficiency by 25% or more just by doing a few simple things, you can improve the efficiency of your fireplace and get more heat out of your fireplace, while enjoying the ambience and beauty of a wood-burning fireplace that is already in your home. If you have a little working knowledge of fireplaces, then you can understand why improving the amount of heat that a fireplace puts out is important to the over all enjoyment of having a fireplace in your home. If you are new to burning real wood-burning fireplaces, there are some very simple ways to improve the amount of heat that your fireplace will produce.
The first thing that you would want to know about your fireplace is it in good working order? As a masonry contractor in the Seattle area we see quite a few chimney every year that are unsafe to burn and need to be repaired. Some of the things that you would want to look for would be, if the fireplace needs repair or has loose brick, smoking problems, water damage, or damper problems. One of the best ways to see if your fireplace is ready to burn is to ask for an inspection from a masonry contractor in your area. Now is the time to start that fire, and as we said above we want the fireplace to burn in an efficient way.
The next step is to clean those well-used fireplace tools and fireplace grate. Black soot and resin can easily build up on your tools and can make them unsightly and grungy-looking. Here are a few simple steps to help bring back their original luster and shine. Take your fireplace grate and tools outside and give them a good hosing down. This will quickly remove all of the loose soot and dirt from the surface. For the fireplace grate, fill a bucket with hot water and a small amount of abrasive cleaner. Scrub with a steel wool pad to remove the caked on resin and soot. You may need to use a stiff-bristled brush to get the really bad parts. For the fireplace tools, use hot water and a small amount of ammonia cleaner. Avoid using abrasives, as these may scratch the finish on your tools. You may use a scrub brush to get the stubborn dirt particles, but use caution so as not to damage the surface.
The flat screen fire-screen can be made of one, two, three or four panels. It might fold up neatly when not in use or may be so aesthetically pleasing that hiding it is undesirable. While a fire-screen serves a clearly defined use-value when used in conjunction with a wood-burning fireplace most homeowners who own gas log fireplaces also use fire-screens. The fire-screen serves as an obstruction to children and pets but is often purchased for its decorative qualities. Fitting a fireplace screen such as the flat panel variety may be relatively easy, as they are not designed to fit flush to the fireplace and can easily over-lap the fireplace width and still look attractive and serve the function of containing sparks on one side and fingers on the other. Not all older brick or cement fireplaces are of a consistent size because most of these fireplaces are built on site as custom designs. While newer fireplace designs are fitted around a standardized firebox, older fireplaces were built custom on site. Newer fireplaces that are customized inside the home use a steel firebox with insulation, heat shields and fire brick already installed. The fire box can be built into a mantle or into a wall of the home with little to no safety features necessary for full functionality.